AbhishekG13/alto-saam-qna · Datasets at Hugging Face

input stringlengths 18 193	output stringlengths 1 978 ⌀
What action should be taken after the software update is complete?	Remove the USB drive.
What is the process for updating the software of the Quickchiller?	To update the software of the Quickchiller, one needs to insert a USB data stick into the data port on the front, enter a passcode, select the update options for the interface board and control board, wait for the update process to complete, and then remove the data stick from the port.
What is the chamber height with wire shelf as per the manual?	21" (535mm)
How many Solenoid Valve & 120V Coil parts are included in the Quickchillers QC3-3 Compressor view?	2
How can you create or edit a recipe in Vector H™ Series?	To create or edit a recipe, you need to touch the gear icon to access the User Configuration screen, then touch the Recipes icon, enter the pass code 12345, and finally touch the check mark to proceed to the Recipes screen.
Is there a request for confirming if the software version is the latest?	Yes, it asks if it is the latest software version
What should be done after entering the pass code 6702?	Touch the check mark to display the general device screen.
What should be done before cleaning the oven according to the warning provided?	Allow the oven, racks, and jet plates to cool.
Who should make the electrical connections for the appliance?	All electrical connections must be made by a qualified and trained service technician following applicable electrical codes.
What action should be taken after plugging the USB drive into the port?	After plugging the USB drive into the port, the recipes can be accessed and loaded onto the oven.
What should you do before you begin cooking with programmed recipes?	Make sure the oven is preheated and your food is prepared and ready to cook.
What should be done after pressing and releasing the high limit temperature reset button(s) during installation?	Remove the tag.
What does the 'Assign to Unit' action do?	The 'Assign to Unit' action assigns the selected unit settings to the specified unit or units.
How is the time/date set on the Quickchillers?	Touch and then touch or to set desired date (YYYY/MM/DD) and time (HH:MM:SS). Touch to enter change and return to set-up screen.
How can the oven be correctly positioned during installation?	By moving it to the installation location and onto the final resting surface.
What is the purpose of touching the Logs icon?	Touching the Logs icon allows you to access the Logs Detail screen.
What happens when you touch 'Update Front End Software' in the Converge® operation?	The oven loads the selected user interface software.
How should the fittings be tightened onto the water inlets during installation?	with slip joint pliers and until the elbows have a slight downward angle
Is site action required for Ethernet connection?	Yes, site action is required.
What are the requirements for the water drain connection?	Water drain should have a 1-1/2' No HUB connection with air gap at the floor and materials that withstand temperatures up to 200°F (93°C).
What is the purpose of the Pre-Installation Company Information section?	The Pre-Installation Company Information section gathers information about the company, technician, and site survey details.
What are the gas supply pressure requirements for Liquid Propane (LP) for the oven?	11” W.C. nominal, 14” W.C. high, 9” W.C. low
How can you save the recipe after selecting photos?	By touching the check mark.
What technology is used in the Vector® Multi-Cook Oven?	Structured Air Technology® is used in the Vector® Multi-Cook Oven.
What should be done to connect the supply cord according to local codes and regulations?	Connect the supply cord to the appropriate terminals (L1, L2, L3, etc.) in accordance with local codes and regulations.
Who is authorized to modify the warranty or incur any other obligation on behalf of Alto-Shaam?	No person except an officer of Alto-Shaam, Inc.
What is the chamber width?	21" (535mm)
What is the warning mentioned regarding cleaning the oven?	Wear eye protection and hand protection, and do not spray cleaner into the oven while the blowers are running.
What do the colors green and red indicate in the context of network icons?	Green indicates strong signal; Red indicates weak signal.
When should the USB drive be plugged in while backing up or restoring settings?	The USB drive should be plugged in after accessing the general settings screen.
What is the recommendation for cleaning the oven after the cool-down process?	Remove any spills and wipe the outside with a damp cloth and stainless steel cleaner.
What temperature range triggers the chilling fans to engage or disengage in the Quickchiller?	Below 30°F (-1°C) to engage, above 60°F (16°C) to disengage.
When was the 'Vector H® Series Operator’s Manual' last revised?	07/23
How can you set the fan speed in the Converge® Operation?	Touch the fan speed icon, enter the fan speed using the keypad, and touch the check mark.
What tools should not be used when cleaning the oven?	Do not use steel pads, wire brushes, or scrapers when cleaning.
What is the first step to install the jet plates in the Vector Wide oven installation?	The first step is to locate the part number on all outer panels and place an outer panel on a table with the part number facing up.
What caution should be taken when moving or leveling the Quickchiller?	Always use a sufficient number of trained and experienced workers to prevent serious injury.
How should the supply cord be connected after installing the cord and cord grip into the oven?	Connect the supply cord to the appropriate terminals (L1, L2, L3, etc.) in accordance with local codes and regulations.
What are the prerequisites for installing the oven on a stand?	The prerequisites for installing the oven on a stand include having the appropriate stand for the oven, following Regulation UL 197, 91.8, and ensuring the availability of an appropriate lifting device and sufficient personnel.
What is discussed under 'Safety Procedures' in the document?	Safety Procedures
What action indicates that the procedure is now complete?	The completion of the procedure is indicated when you touch the check mark.
What is the title of the operator's manual for the Vector H® Series?	Operator’s Manual
Does the recipient of alert code notifications need a ChefLinc account?	No, the recipient does not need a ChefLinc account.
What is the note provided after unpacking the oven?	Examine the appliance for damage.
What is the first step to link chambers according to the manual?	The first step is to touch the Program icon to link chambers.
What steps are involved in checking the damper system of the oven?	Remove the shelf to combine chambers, confirm that the vent flaps close, touch the combine icon, combine chambers 1 and 2, touch combine, touch the check mark, and repeat for chambers 3 and 4 if needed.
What is the recommendation for cleaning the oven after the cool-down process?	Remove any spills and wipe the outside with a damp cloth and stainless steel cleaner.
What is the electrical connection requirement?	electrical connection
What is the first step to successfully link chambers according to the manual?	The first step is to touch the Program icon to link chambers.
What should be done after removing the cooling fan filters?	Clean with a mild cleaner and rinse with hot water.
What is the purpose of the Settings icon in the temperature scale adjustment procedure?	The Settings icon is used to access the general settings screen where the option to adjust the temperature scale can be found.
What is the revision number of the operation manual?	Rev 05
What is the title of the manual?	Operator’s Manual
What may be programmed into the controller to assist in cleaning the oven?	The number of hours until the next cleaning.
What should you do if you want to assign all recipes in ChefLinc™?	Click 'Select All'.
What is the significance of the 'VMC-TS-007501' reference at the end of the content?	The 'VMC-TS-007501' reference at the end of the content is likely related to a specific part or component.
What is the key function of the select temperature units screen?	The key function of the select temperature units screen is to allow the selection of the temperature scale, either in °F or °C.
What is the content of the warning related to 'Electric Shock Hazard'?	The content related to 'Electric Shock Hazard' advises against removing or opening the cover and recommends referring servicing to qualified personnel after disconnecting power.
What are some electrical precautions to follow when using the appliance?	Connect the appliance to a properly grounded outlet, keep the cord away from hot surfaces, do not attempt to service the appliance or its cord and plug, do not operate the appliance if it has a damaged cord or plug, do not immerse the cord or plug in water, do not let the cord hang over the edge of a table or counter, do not use an extension cord.
What happens when the oven downloads the data onto the USB drive?	The download successful screen displays.
What is the result of loading the recipes?	The recipes are now loaded.
What safety instructions should be followed when using stainless steel polish on the oven?	Follow safety instructions on the bottle of the stainless steel polish.
How many servings per pan are there for Meat, Poultry, Fish, and Seafood?	48
What is the title of the operator's manual for the Vector H® Series?	Operator’s Manual
Why should the appliance door be opened very slowly?	The appliance door should be opened very slowly to prevent escaping hot vapors or steam which can cause serious injury.
What happens after the expiration of a timed cycle in the Quickchiller?	The cabinet automatically reverts to the designated holding cycle temperature.
Which icon should be touched to access the HACCP data screen?	To access the HACCP data screen, touch the HACCP data icon.
What is the warranty period for original parts?	The warranty period for original parts is one year from the date of installation of the appliance or fifteen months from the shipping date, whichever occurs first.
What is the instruction after installing the first leg assembly into the top panel?	Install the second leg assembly into the top panel.
What information is requested regarding the IP address?	To provide the IP address
Who is permitted to use the appliance based on operator qualifications?	Only trained personnel who have received proper instruction and demonstrated their ability with commercial kitchens and appliances.
What is the procedure to clean the oven on a daily basis?	Touch and hold the ON/OFF button, remove spills, wipe the outside, and use a stainless steel cleaner.
How can you modify a recipe in Vector F® Series Gas?	To modify a recipe, you need to touch the recipe settings icon of the desired recipe.
When should you touch the Temperature Units setting in the process?	You should touch the Temperature Units setting when you want to change the temperature scale.
What options are under the Oven Info Clean User Configuration?	Under Oven Info Clean User Configuration, Auto and Cool options are available.
What happens when you touch the start icon after distributing the cleaning tablets?	The oven heats to the required temperature for the cleaning cycle, and then the cleaning cycle starts.
What is provided in the Installation section of the manual?	The Installation section includes instructions on how to install and set up the Alto-Shaam Converge Oven.
How can you navigate to the Temperature Units setting?	You can navigate to the Temperature Units setting by scrolling to the Temperature Settings in the general settings screen.
What should be done if the High Limit Screen Displays?	Specific actions should be taken if the High Limit Screen Displays.
What is the rated current for a nominal cross-sectional area of >25 – ≤32 mm2?	For a nominal cross-sectional area between >25 – ≤32 mm2, the rated current is 4 A.
What should be clicked to select all recipes for export?	Click 'Select All' to choose all recipes for export.
How can one address the E-10 error related to cavity sensor short on the Prodigi Oven?	Power down control, cycle power to the oven, and resume use. Contact a service provider if error reappears.
What is the procedure to cool down the oven?	To cool down the oven, touch the manual cook icon, then touch the cool down icon. Finally, touch 'Cool down' and open the door.
What should be avoided when connecting to a network?	Do not connect to a guest network.
What is the document number?	MN-47201
What should be included in any correspondence regarding the appliance?	Both model and serial number(s).
What actions to take when facing E-78 Lower VFD under voltage error?	Check the unit plug, reset the main circuit breaker. If error reappears, contact service provider.
What is the acceptable range for Total Dissolved Solids (TDS) in treated water?	Total Dissolved Solids (TDS) should be within 50–125 ppm in treated water.
What happens when the forward arrow icon 3 is touched during the cooking process?	The recipe name screen displays.
What does the Nomenclature CMC-H2H stand for in the Alto-Shaam oven system?	CMC-H2H means Combi Multi-Cook, half-size, two-chamber, and hotel pans in the Alto-Shaam oven system.
What should be done if the oven is in a cooking mode before backing up or restoring settings?	If the oven is in a cooking mode before backing up or restoring settings, it should be turned off.
How can one return to the home screen after enabling Auto Cool?	To return to the home screen after enabling Auto Cool, touch the back arrows twice.
What items are listed under the 'READY' section on the screen?	Under the 'READY' section, items like Bacon, French toast, Fried eggs, Biscuits are listed as ready to cook.
Where is the office of Alto-Shaam located in Aix en Provence, France?	Aix en Provence, France
What technology does the Alto-Shaam Converge Oven feature?	The Alto-Shaam Converge Oven features Structured Air Technology.
Is the oven intended for built-in installation?	No, the oven is not intended for built-in installation
What is the item description for part number RE-29861 in the Quickchillers QC3-3 Compressor view?	Condensing Assembly, 1/2 MED R404A 120V
What action will overwrite the current settings of the units?	Assigning the selected settings file to units will overwrite their current settings.
What information is required in the Location Information section during installation?	The Location Information section requires details such as installation date, location name, contact information, number of ovens to be installed, etc.
What should be done if the signal strength bars of the network icon are green?	Check for the correct SSID password.

What action should be taken after the software update is complete?

Remove the USB drive.

What is the process for updating the software of the Quickchiller?

To update the software of the Quickchiller, one needs to insert a USB data stick into the data port on the front, enter a passcode, select the update options for the interface board and control board, wait for the update process to complete, and then remove the data stick from the port.

What is the chamber height with wire shelf as per the manual?

21" (535mm)

How many Solenoid Valve & 120V Coil parts are included in the Quickchillers QC3-3 Compressor view?

2

How can you create or edit a recipe in Vector H™ Series?

To create or edit a recipe, you need to touch the gear icon to access the User Configuration screen, then touch the Recipes icon, enter the pass code 12345, and finally touch the check mark to proceed to the Recipes screen.

Is there a request for confirming if the software version is the latest?

Yes, it asks if it is the latest software version

What should be done after entering the pass code 6702?

Touch the check mark to display the general device screen.

What should be done before cleaning the oven according to the warning provided?

Allow the oven, racks, and jet plates to cool.

Who should make the electrical connections for the appliance?

All electrical connections must be made by a qualified and trained service technician following applicable electrical codes.

What action should be taken after plugging the USB drive into the port?

After plugging the USB drive into the port, the recipes can be accessed and loaded onto the oven.

What should you do before you begin cooking with programmed recipes?

Make sure the oven is preheated and your food is prepared and ready to cook.

What should be done after pressing and releasing the high limit temperature reset button(s) during installation?

Remove the tag.

What does the 'Assign to Unit' action do?

The 'Assign to Unit' action assigns the selected unit settings to the specified unit or units.

How is the time/date set on the Quickchillers?

Touch and then touch or to set desired date (YYYY/MM/DD) and time (HH:MM:SS). Touch to enter change and return to set-up screen.

How can the oven be correctly positioned during installation?

By moving it to the installation location and onto the final resting surface.

What is the purpose of touching the Logs icon?

Touching the Logs icon allows you to access the Logs Detail screen.

What happens when you touch 'Update Front End Software' in the Converge® operation?

The oven loads the selected user interface software.

How should the fittings be tightened onto the water inlets during installation?

with slip joint pliers and until the elbows have a slight downward angle

Is site action required for Ethernet connection?

Yes, site action is required.

What are the requirements for the water drain connection?

Water drain should have a 1-1/2' No HUB connection with air gap at the floor and materials that withstand temperatures up to 200°F (93°C).

What is the purpose of the Pre-Installation Company Information section?

The Pre-Installation Company Information section gathers information about the company, technician, and site survey details.

What are the gas supply pressure requirements for Liquid Propane (LP) for the oven?

11” W.C. nominal, 14” W.C. high, 9” W.C. low

How can you save the recipe after selecting photos?

By touching the check mark.

What technology is used in the Vector® Multi-Cook Oven?

Structured Air Technology® is used in the Vector® Multi-Cook Oven.

What should be done to connect the supply cord according to local codes and regulations?

Connect the supply cord to the appropriate terminals (L1, L2, L3, etc.) in accordance with local codes and regulations.

Who is authorized to modify the warranty or incur any other obligation on behalf of Alto-Shaam?

No person except an officer of Alto-Shaam, Inc.

What is the chamber width?

21" (535mm)

What is the warning mentioned regarding cleaning the oven?

Wear eye protection and hand protection, and do not spray cleaner into the oven while the blowers are running.

What do the colors green and red indicate in the context of network icons?

Green indicates strong signal; Red indicates weak signal.

When should the USB drive be plugged in while backing up or restoring settings?

The USB drive should be plugged in after accessing the general settings screen.

What is the recommendation for cleaning the oven after the cool-down process?

Remove any spills and wipe the outside with a damp cloth and stainless steel cleaner.

What temperature range triggers the chilling fans to engage or disengage in the Quickchiller?

Below 30°F (-1°C) to engage, above 60°F (16°C) to disengage.

When was the 'Vector H® Series Operator’s Manual' last revised?

07/23

How can you set the fan speed in the Converge® Operation?

Touch the fan speed icon, enter the fan speed using the keypad, and touch the check mark.

What tools should not be used when cleaning the oven?

Do not use steel pads, wire brushes, or scrapers when cleaning.

What is the first step to install the jet plates in the Vector Wide oven installation?

The first step is to locate the part number on all outer panels and place an outer panel on a table with the part number facing up.

What caution should be taken when moving or leveling the Quickchiller?

Always use a sufficient number of trained and experienced workers to prevent serious injury.

How should the supply cord be connected after installing the cord and cord grip into the oven?

Connect the supply cord to the appropriate terminals (L1, L2, L3, etc.) in accordance with local codes and regulations.

What are the prerequisites for installing the oven on a stand?

The prerequisites for installing the oven on a stand include having the appropriate stand for the oven, following Regulation UL 197, 91.8, and ensuring the availability of an appropriate lifting device and sufficient personnel.

What is discussed under 'Safety Procedures' in the document?

Safety Procedures

What action indicates that the procedure is now complete?

The completion of the procedure is indicated when you touch the check mark.

What is the title of the operator's manual for the Vector H® Series?

Operator’s Manual

Does the recipient of alert code notifications need a ChefLinc account?

No, the recipient does not need a ChefLinc account.

What is the note provided after unpacking the oven?

Examine the appliance for damage.

What is the first step to link chambers according to the manual?

The first step is to touch the Program icon to link chambers.

What steps are involved in checking the damper system of the oven?

Remove the shelf to combine chambers, confirm that the vent flaps close, touch the combine icon, combine chambers 1 and 2, touch combine, touch the check mark, and repeat for chambers 3 and 4 if needed.

What is the recommendation for cleaning the oven after the cool-down process?

Remove any spills and wipe the outside with a damp cloth and stainless steel cleaner.

What is the electrical connection requirement?

electrical connection

What is the first step to successfully link chambers according to the manual?

The first step is to touch the Program icon to link chambers.

What should be done after removing the cooling fan filters?

Clean with a mild cleaner and rinse with hot water.

What is the purpose of the Settings icon in the temperature scale adjustment procedure?

The Settings icon is used to access the general settings screen where the option to adjust the temperature scale can be found.

What is the revision number of the operation manual?

Rev 05

What is the title of the manual?

Operator’s Manual

What may be programmed into the controller to assist in cleaning the oven?

The number of hours until the next cleaning.

What should you do if you want to assign all recipes in ChefLinc™?

Click 'Select All'.

What is the significance of the 'VMC-TS-007501' reference at the end of the content?

The 'VMC-TS-007501' reference at the end of the content is likely related to a specific part or component.

What is the key function of the select temperature units screen?

The key function of the select temperature units screen is to allow the selection of the temperature scale, either in °F or °C.

What is the content of the warning related to 'Electric Shock Hazard'?

The content related to 'Electric Shock Hazard' advises against removing or opening the cover and recommends referring servicing to qualified personnel after disconnecting power.

What are some electrical precautions to follow when using the appliance?

Connect the appliance to a properly grounded outlet, keep the cord away from hot surfaces, do not attempt to service the appliance or its cord and plug, do not operate the appliance if it has a damaged cord or plug, do not immerse the cord or plug in water, do not let the cord hang over the edge of a table or counter, do not use an extension cord.

What happens when the oven downloads the data onto the USB drive?

The download successful screen displays.

What is the result of loading the recipes?

The recipes are now loaded.

What safety instructions should be followed when using stainless steel polish on the oven?

Follow safety instructions on the bottle of the stainless steel polish.

How many servings per pan are there for Meat, Poultry, Fish, and Seafood?

48

What is the title of the operator's manual for the Vector H® Series?

Operator’s Manual

Why should the appliance door be opened very slowly?

The appliance door should be opened very slowly to prevent escaping hot vapors or steam which can cause serious injury.

What happens after the expiration of a timed cycle in the Quickchiller?

The cabinet automatically reverts to the designated holding cycle temperature.

Which icon should be touched to access the HACCP data screen?

To access the HACCP data screen, touch the HACCP data icon.

What is the warranty period for original parts?

The warranty period for original parts is one year from the date of installation of the appliance or fifteen months from the shipping date, whichever occurs first.

What is the instruction after installing the first leg assembly into the top panel?

Install the second leg assembly into the top panel.

What information is requested regarding the IP address?

To provide the IP address

Who is permitted to use the appliance based on operator qualifications?

Only trained personnel who have received proper instruction and demonstrated their ability with commercial kitchens and appliances.

What is the procedure to clean the oven on a daily basis?

Touch and hold the ON/OFF button, remove spills, wipe the outside, and use a stainless steel cleaner.

How can you modify a recipe in Vector F® Series Gas?

To modify a recipe, you need to touch the recipe settings icon of the desired recipe.

When should you touch the Temperature Units setting in the process?

You should touch the Temperature Units setting when you want to change the temperature scale.

What options are under the Oven Info Clean User Configuration?

Under Oven Info Clean User Configuration, Auto and Cool options are available.

What happens when you touch the start icon after distributing the cleaning tablets?

The oven heats to the required temperature for the cleaning cycle, and then the cleaning cycle starts.

What is provided in the Installation section of the manual?

The Installation section includes instructions on how to install and set up the Alto-Shaam Converge Oven.

How can you navigate to the Temperature Units setting?

You can navigate to the Temperature Units setting by scrolling to the Temperature Settings in the general settings screen.

What should be done if the High Limit Screen Displays?

Specific actions should be taken if the High Limit Screen Displays.

What is the rated current for a nominal cross-sectional area of >25 – ≤32 mm2?

For a nominal cross-sectional area between >25 – ≤32 mm2, the rated current is 4 A.

What should be clicked to select all recipes for export?

Click 'Select All' to choose all recipes for export.

How can one address the E-10 error related to cavity sensor short on the Prodigi Oven?

Power down control, cycle power to the oven, and resume use. Contact a service provider if error reappears.

What is the procedure to cool down the oven?

To cool down the oven, touch the manual cook icon, then touch the cool down icon. Finally, touch 'Cool down' and open the door.

What should be avoided when connecting to a network?

Do not connect to a guest network.

What is the document number?

MN-47201

What should be included in any correspondence regarding the appliance?

Both model and serial number(s).

What actions to take when facing E-78 Lower VFD under voltage error?

Check the unit plug, reset the main circuit breaker. If error reappears, contact service provider.

What is the acceptable range for Total Dissolved Solids (TDS) in treated water?

Total Dissolved Solids (TDS) should be within 50–125 ppm in treated water.

What happens when the forward arrow icon 3 is touched during the cooking process?

The recipe name screen displays.

What does the Nomenclature CMC-H2H stand for in the Alto-Shaam oven system?

CMC-H2H means Combi Multi-Cook, half-size, two-chamber, and hotel pans in the Alto-Shaam oven system.

What should be done if the oven is in a cooking mode before backing up or restoring settings?

If the oven is in a cooking mode before backing up or restoring settings, it should be turned off.

How can one return to the home screen after enabling Auto Cool?

To return to the home screen after enabling Auto Cool, touch the back arrows twice.

What items are listed under the 'READY' section on the screen?

Under the 'READY' section, items like Bacon, French toast, Fried eggs, Biscuits are listed as ready to cook.

Where is the office of Alto-Shaam located in Aix en Provence, France?

Aix en Provence, France

What technology does the Alto-Shaam Converge Oven feature?

The Alto-Shaam Converge Oven features Structured Air Technology.

Is the oven intended for built-in installation?

No, the oven is not intended for built-in installation

What is the item description for part number RE-29861 in the Quickchillers QC3-3 Compressor view?

Condensing Assembly, 1/2 MED R404A 120V

What action will overwrite the current settings of the units?

Assigning the selected settings file to units will overwrite their current settings.

What information is required in the Location Information section during installation?

The Location Information section requires details such as installation date, location name, contact information, number of ovens to be installed, etc.

What should be done if the signal strength bars of the network icon are green?

Check for the correct SSID password.