| ******** | |
| Segments | |
| ******** | |
| Subdivision | |
| =========== | |
| .. admonition:: Reference | |
| :class: refbox | |
| :Mode: Edit Mode | |
| :Menu: :menuselection:`Surface --> Segments --> Subdivide` | |
| The *Subdivision* operator simply subdivides all selected segments | |
| by adding one or more control points between the selected segments. | |
| Selected grids will be split into four smaller ones. | |
| If used on a 1D surface (a "surface curve"), | |
| this tool works exactly as with :ref:`curves <modeling-curves-subdivision>`. | |
| Number of Cuts | |
| The number of subdivisions to perform. | |
| .. _modeling_surfaces_editing_segments_switch-direction: | |
| Switch Direction | |
| ================ | |
| .. admonition:: Reference | |
| :class: refbox | |
| :Mode: Edit Mode | |
| :Menu: :menuselection:`Surface --> Segments --> Switch Direction` | |
| This tool will "reverse" the direction of any curve with at least one selected element | |
| (i.e. the start point will become the end one, and *vice versa*). | |
| Mainly useful when using a curve as path, or the bevel and taper options... | |