prompt
stringlengths 215
7.32k
| response
stringlengths 1
523
|
|---|---|
We would like you to assess the QUALITY of each of the following argument (discussing Death Penalty) and determine if the argument is Valid or Invalid. A valid argument is clearly interpretable and either expresses an argument, or a premise or a conclusion that can be used in an argument for the topic of death penalty. An invalid argument is a phrase that cannot be interpreted as an argument or not on the topic of death penalty.
I think that if the murderer wants the death penalty, they should be allowed it if the victim's family agrees- but for crimes of passion and misunderstanding, no death penalty. | Valid |
Given the task definition and input, reply with output. In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[-21.391 -42.074 85.588 98.963 -99.751 27.116 -38.627]
| -99.751 |
Given the task definition and input, reply with output. Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_LEFT I_TURN_LEFT I_WALK
| walk opposite left after jump around right |
Part 1. Definition
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
Part 2. Example
[47, 444, 859, 530, 197, 409]
Answer: [47, 859, 197, 409]
Explanation: The integers '444' and '530' are not prime integers and they were removed from the list.
Part 3. Exercise
[469, 11, 43, 283]
Answer: | [11, 43, 283] |
Teacher:In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
Teacher: Now, understand the problem? Solve this instance: [ 48.008 -9.981 -71.091 56.17 ]
Student: | -71.091 |
Q: In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[-55.185 40.101 -70.434 96.346 12.693 -67.818 -38.005 -45.93 46.391
44.53 ]
A: | 96.346 |
In this task, you are given a country name and you need to return the Top Level Domain (TLD) of the given country. The TLD is the part that follows immediately after the "dot" symbol in a website's address. The output, TLD is represented by a ".", followed by the domain.
Q: Lithuania
A: | .lt |
Part 1. Definition
Given a concept word, generate a hypernym for it. A hypernym is a superordinate, i.e. a word with a broad meaning constituting a category, that generalizes another word. For example, color is a hypernym of red.
Part 2. Example
crystal
Answer: rock
Explanation: A crystal is a type of rock, so rock is a valid hypernym output.
Part 3. Exercise
experience
Answer: | education |
In this task, you are given a date in "mm/dd/yyyy" format. You need to check if the date is valid or not. Return 1 if it is valid, else return 0. A date is valid is the components month("mm"), day("dd") and year("yyyy") are all valid individually. A day(dd) is valid if it is greater than or equal to 1 and less than 30 or 31 depending upon the month(mm). Months which have 31 days are January, March, May, July, August, October, December. Rest of the months have 30 days except February which has 28 days if it is not a leap year and 29 days if it is a leap year. A month(mm) is valid if it lies in the range from 1 to 12 as there are 12 months in a year. A year is always valid if it is expressed in the form of "yyyy".
14/19/1360 | 0 |
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
One example: bYubMFxyTqR, AcDbMFxSnI
Solution is here: bYubfmxyTqR, AcDbfmxSnI
Explanation: Here, 'bMFx' is the longest common substring in both the input strings 'bYubMFxyTqR' and 'AcDbMFxSnI'. Sorting it and converting to lowercase gives 'bfmx'. Replacing 'bfmx' instead of 'bMFx' in the two strings gives 'bYubfmxyTqR' and 'AcDbfmxSnI'
Now, solve this: lePPTaFaNFPUWeMQKRvrbvezwHorytsR, iBsvhymZCCkPTaFaNFPUWeMQKRvrbvepNI
Solution: | lePaabeeffkmnppqrrtuvvwzwHorytsR, iBsvhymZCCkaabeeffkmnppqrrtuvvwpNI |
You will be given a definition of a task first, then some input of the task.
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
RbGxofisdvEvGDRdqdVxmyOwqjEorZQtWtHcn, SdDOaFPYFPhFnErwqofisdvEvGDRdqdVxmycvSkSpeirBXFLIY
Output: | RbGxddddefgimoqrsvvvxyOwqjEorZQtWtHcn, SdDOaFPYFPhFnErwqddddefgimoqrsvvvxycvSkSpeirBXFLIY |
Definition: In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
Input: [ -6.23 -61.467 17.904 -50.119 -52.37 ]
Output: | -61.467 |
In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[ 40.293 11.354 -44.122 -95.883 64.637 -30.559 32.124 -69.833 -42.331
55.313] | -95.883 |
Given the task definition, example input & output, solve the new input case.
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
Example: [47, 444, 859, 530, 197, 409]
Output: [47, 859, 197, 409]
The integers '444' and '530' are not prime integers and they were removed from the list.
New input case for you: [34, 584, 809, 362, 631, 217, 233, 808, 521, 941, 535, 31, 607, 383, 439, 149, 647, 529]
Output: | [809, 631, 233, 521, 941, 31, 607, 383, 439, 149, 647] |
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
--------
Question: I_JUMP I_JUMP I_JUMP I_TURN_LEFT I_TURN_LEFT I_JUMP I_TURN_LEFT I_TURN_LEFT I_JUMP I_TURN_LEFT I_TURN_LEFT I_JUMP
Answer: jump thrice and jump opposite left thrice
Question: I_TURN_RIGHT I_TURN_LEFT I_LOOK
Answer: turn right and look left
Question: I_LOOK I_LOOK I_LOOK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK
Answer: | walk right twice after look thrice
|
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
One example: [47, 444, 859, 530, 197, 409]
Solution is here: [47, 859, 197, 409]
Explanation: The integers '444' and '530' are not prime integers and they were removed from the list.
Now, solve this: [364, 26]
Solution: | [] |
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
[314, 877, 967, 639, 858, 967, 570, 73, 797, 571, 761, 986, 11, 373, 268, 531, 997, 495, 983]
[877, 967, 967, 73, 797, 571, 761, 11, 373, 997, 983]
[557, 647, 79, 153, 305, 413, 167, 615, 575, 461, 575, 977]
[557, 647, 79, 167, 461, 977]
[193, 665, 617, 861, 156, 7, 472, 559, 644, 684, 734, 787, 808, 293, 11]
| [193, 617, 7, 787, 293, 11]
|
In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[ 95.666 -77.032 99.29 ]
99.29
[-97.419 -29.173 2.453]
-97.419
[15.404 28.186 50.714 73.218 87.562 78.806 60.679 10.34 46.982]
| 87.562
|
You will be given a definition of a task first, then some input of the task.
A ploynomial equation is a sum of terms. Here each term is either a constant number, or consists of the variable x raised to a certain power and multiplied by a number. These numbers are called weights. For example, in the polynomial: 2x^2+3x+4, the weights are: 2,3,4. You can present a polynomial with the list of its weights, for example, equation weights = [6, 4] represent the equation 6x + 4 and equation weights = [1, 3, 4] represent the equation 1x^2 + 3x + 4. In this task, you need to compute the result of a polynomial expression by substituing a given value of x in the given polynomial equation. Equation weights are given as a list.
x = 2, equation weights = [7, 6, 8, 5]
Output: | 101 |
Given the task definition, example input & output, solve the new input case.
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
Example: I_TURN_LEFT I_JUMP
Output: jump left
If the agent turned to the left and jumped, then the agent jumped to the left.
New input case for you: I_TURN_RIGHT I_TURN_RIGHT I_RUN I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK
Output: | walk around right after run opposite right |
In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Let me give you an example: Find the id and city of the student address with the highest average monthly rental.
The answer to this example can be: SELECT T2.address_id , T1.city FROM Addresses AS T1 JOIN Student_Addresses AS T2 ON T1.address_id = T2.address_id GROUP BY T2.address_id ORDER BY AVG(monthly_rental) DESC LIMIT 1
Here is why: First we select the student's id and city of their address. Next, to find where each student lived we must join the "Addresses" table with the "Student_Addresses" table on rows with the same "address_id". Finally, we want to return the student address with the highest monthly rent. This is a good example.
OK. solve this:
What are the names of the members and branches at which they are registered sorted by year of registration?
Answer: | SELECT T3.name , T2.name FROM membership_register_branch AS T1 JOIN branch AS T2 ON T1.branch_id = T2.branch_id JOIN member AS T3 ON T1.member_id = T3.member_id ORDER BY T1.register_year |
You are given a time in 24-Hours format, and you need to convert it to time in the 12-Hours format. For a 24-Hours format time larger than 12:00, subtract 12 hours from the given time, then add 'PM'. For example, if you have 14:30 hours, subtract 12 hours, and the result is 2:30 PM. If the 24-Hours format time is less than or equal to 12:00, add 'AM'. For example, say you have 10:15 hours, add the 'AM' to the end, here we get 10:15 AM. Note that 00:00 Hrs in 24-Hours format is 12:00 AM in 12-Hours format and 12:00 Hrs in 24-Hours format would be 12:00 PM in 12-Hours format.
[EX Q]: 07:10 Hrs
[EX A]: 07:10 AM
[EX Q]: 10:32 Hrs
[EX A]: 10:32 AM
[EX Q]: 22:07 Hrs
[EX A]: | 10:07 PM
|
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
Ex Input:
IHNlNNYMHCKJsKVIwrGEHTudTjkyRjWy, QkYMHCKJsKVIwrGEHTudxRzNekCsDyVFG
Ex Output:
IHNlNNcdeghhijkkmrstuvwyTjkyRjWy, QkcdeghhijkkmrstuvwyxRzNekCsDyVFG
Ex Input:
LHZUoZxlMWKfkzsQbUNeIWICNc, yTnoZxlMWKfkzsQmhFTYk
Ex Output:
LHZUfkklmoqswxzzbUNeIWICNc, yTnfkklmoqswxzzmhFTYk
Ex Input:
yVnyzbQJyYOwBFkeRjxjZ, eHJyYOwBFkeRjxtjqdvtYOdz
Ex Output:
| yVnyzbQbefjjkorwxyyjZ, eHbefjjkorwxyytjqdvtYOdz
|
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
--------
Question: [659, 536, 569, 911, 677, 27, 549, 359, 547, 89]
Answer: [659, 569, 911, 677, 359, 547, 89]
Question: [965, 448, 466, 509, 911, 379, 462, 313, 379, 7, 516, 5, 285, 918]
Answer: [509, 911, 379, 313, 379, 7, 5]
Question: [307, 457, 73, 41, 11, 89]
Answer: | [307, 457, 73, 41, 11, 89]
|
In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Q: What is the average pages per minute color?
A: | SELECT avg(pages_per_minute_color) FROM product |
Given a concept word, generate a hypernym for it. A hypernym is a superordinate, i.e. a word with a broad meaning constituting a category, that generalizes another word. For example, color is a hypernym of red.
--------
Question: black
Answer: man
Question: symbolic
Answer: iconic
Question: truck
Answer: | artifact
|
Teacher: We would like you to assess the QUALITY of each of the following argument (discussing Death Penalty) and determine if the argument is Valid or Invalid. A valid argument is clearly interpretable and either expresses an argument, or a premise or a conclusion that can be used in an argument for the topic of death penalty. An invalid argument is a phrase that cannot be interpreted as an argument or not on the topic of death penalty.
Teacher: Now, understand the problem? If you are still confused, see the following example:
The fact that you do not want to donate to these poor, needy people only shows me that you really do not care about the embryos
Solution: Invalid
Reason: It is not an argument on the topic of death penalty.
Now, solve this instance: Anybody that tries to defend a child rapist and say that they don't deserve to die needs a serious psychiatric evaluation.
Student: | Valid |
Detailed Instructions: In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
See one example below:
Problem: bYubMFxyTqR, AcDbMFxSnI
Solution: bYubfmxyTqR, AcDbfmxSnI
Explanation: Here, 'bMFx' is the longest common substring in both the input strings 'bYubMFxyTqR' and 'AcDbMFxSnI'. Sorting it and converting to lowercase gives 'bfmx'. Replacing 'bfmx' instead of 'bMFx' in the two strings gives 'bYubfmxyTqR' and 'AcDbfmxSnI'
Problem: jPtQYmnUPiBoRHqexrhcR, KNYmnUPiBoRCVIqIvkg
Solution: | jPtQbimnopruyHqexrhcR, KNbimnopruyCVIqIvkg |
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
--------
Question: I_TURN_LEFT I_RUN I_TURN_LEFT I_RUN I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_JUMP
Answer: run left twice and jump around right twice
Question: I_TURN_LEFT I_TURN_LEFT I_WALK I_TURN_LEFT I_TURN_LEFT I_WALK I_TURN_LEFT I_TURN_LEFT I_WALK I_TURN_RIGHT I_LOOK
Answer: look right after walk opposite left thrice
Question: I_TURN_RIGHT I_WALK I_TURN_LEFT I_LOOK I_TURN_LEFT I_LOOK I_TURN_LEFT I_LOOK
Answer: | look left thrice after walk right
|
In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[ 98.071 -66.477 23.262 -50.834 53.196 82.428 45.07 ] | 98.071 |
In this task, you are given a country name and you need to answer with the government type of the country, as of the year 2015. The following are possible government types that are considered valid answers: Republic, Parliamentary Coprincipality, Federal Republic, Monarchy, Islamic Republic, Constitutional Monarchy, Parlementary Monarchy, Federation.
Example input: Angola
Example output: Republic
Example explanation: Republic is the government type of the country called Angola.
Q: Cocos (Keeling) Islands
A: | Territory of Australia |
You will be given a definition of a task first, then some input of the task.
In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Which students are advised by Michael Goodrich? Give me their first and last names.
Output: | SELECT T2.fname , T2.lname FROM Faculty AS T1 JOIN Student AS T2 ON T1.FacID = T2.advisor WHERE T1.fname = "Michael" AND T1.lname = "Goodrich" |
Detailed Instructions: A ploynomial equation is a sum of terms. Here each term is either a constant number, or consists of the variable x raised to a certain power and multiplied by a number. These numbers are called weights. For example, in the polynomial: 2x^2+3x+4, the weights are: 2,3,4. You can present a polynomial with the list of its weights, for example, equation weights = [6, 4] represent the equation 6x + 4 and equation weights = [1, 3, 4] represent the equation 1x^2 + 3x + 4. In this task, you need to compute the result of a polynomial expression by substituing a given value of x in the given polynomial equation. Equation weights are given as a list.
See one example below:
Problem: x = 3, equation weights = [4, 2]
Solution: 14
Explanation: Here, the weights represent the polynomial: 4x + 2, so we should multiply 4 by 3, and add it to 2 which results in (4*3 + 2 =) 14.
Problem: x = 7, equation weights = [5, 0]
Solution: | 35 |
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
[372, 548, 101, 423, 467, 381, 526, 827, 241, 673, 151, 401, 875, 821, 283, 699, 397, 700, 877] | [101, 467, 827, 241, 673, 151, 401, 821, 283, 397, 877] |
Teacher: In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Teacher: Now, understand the problem? If you are still confused, see the following example:
Find the id and city of the student address with the highest average monthly rental.
Solution: SELECT T2.address_id , T1.city FROM Addresses AS T1 JOIN Student_Addresses AS T2 ON T1.address_id = T2.address_id GROUP BY T2.address_id ORDER BY AVG(monthly_rental) DESC LIMIT 1
Reason: First we select the student's id and city of their address. Next, to find where each student lived we must join the "Addresses" table with the "Student_Addresses" table on rows with the same "address_id". Finally, we want to return the student address with the highest monthly rent. This is a good example.
Now, solve this instance: Show minimum, maximum, and average market value for all companies.
Student: | SELECT min(market_value) , max(market_value) , avg(market_value) FROM company |
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
IoUesFjUiPWCGZHmcACtMI, IfMzhlezitUesFjUiPWCzxKKaskT
IocefijpsuuwGZHmcACtMI, IfMzhlezitcefijpsuuwzxKKaskT
GJgsqpRApFPjXzTSVj, MGhVVkagsqpRApFPjXSWXfa
GJafgjpppqrsxzTSVj, MGhVVkaafgjpppqrsxSWXfa
QMOYhcnZJfAkhlvYz, BWVzBKcnZJfAvdw
| QMOYhacfjnzkhlvYz, BWVzBKacfjnzvdw
|
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
[688, 993, 3, 101, 281, 674, 359, 246, 421, 491, 82, 565, 89, 493]
[3, 101, 281, 359, 421, 491, 89]
[192, 899, 596, 394, 55, 546, 559, 619, 936, 739, 735, 639, 732, 933, 337, 317, 730, 727]
[619, 739, 337, 317, 727]
[658, 311, 322, 320, 957, 773]
| [311, 773]
|
Q: In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
[903, 221, 449, 442, 367, 707, 732, 157, 607, 227, 991, 293, 839, 990, 590, 607, 798, 379]
A: | [449, 367, 157, 607, 227, 991, 293, 839, 607, 379] |
TASK DEFINITION: In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
PROBLEM: Return the average, maximum, and total revenues across all manufacturers.
SOLUTION: SELECT avg(revenue) , max(revenue) , sum(revenue) FROM manufacturers
PROBLEM: display the emails of the employees who have no commission percentage and salary within the range 7000 to 12000 and works in that department which number is 50.
SOLUTION: SELECT email FROM employees WHERE commission_pct = "null" AND salary BETWEEN 7000 AND 12000 AND department_id = 50
PROBLEM: How many products are there for each manufacturer?
SOLUTION: | SELECT count(*) , T2.name FROM products AS T1 JOIN manufacturers AS T2 ON T1.Manufacturer = T2.code GROUP BY T2.name
|
Detailed Instructions: In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
See one example below:
Problem: [-11, 2, 3]
Solution: -11
Explanation: The element with the largest absolute value is -11, since 11 > 3 > 2. This is a good example.
Problem: [ 29.473 1.861 -0.947 -2.017 -65.375 -35.285 -33.597 -89.244 -87.747]
Solution: | -89.244 |
In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Example input: Find the id and city of the student address with the highest average monthly rental.
Example output: SELECT T2.address_id , T1.city FROM Addresses AS T1 JOIN Student_Addresses AS T2 ON T1.address_id = T2.address_id GROUP BY T2.address_id ORDER BY AVG(monthly_rental) DESC LIMIT 1
Example explanation: First we select the student's id and city of their address. Next, to find where each student lived we must join the "Addresses" table with the "Student_Addresses" table on rows with the same "address_id". Finally, we want to return the student address with the highest monthly rent. This is a good example.
Q: What is the total number of people who could stay in the modern rooms in this inn?
A: | SELECT sum(maxOccupancy) FROM Rooms WHERE decor = 'modern' |
Q: Read the given message of a sender that is intended to start a conversation, and determine whether it was written by a 'Bot' or by a 'Human'. Typically, bots will have a more disjointed manner of speaking, and will make statements that don't relate to each other, don't make coherent sense, or otherwise appear unnatural. Human will make statements in a more or less coherent and logical way. Since these messages are supposed to be conversation openers, humans will generally start sensibly with a hello or an introduction. Humans may also ask why the other person is not responding. Bots, however, may act as if they are in the middle of a nonsensical conversation.
SENDER A: hey there
A: | Human |
Teacher:In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
Teacher: Now, understand the problem? Solve this instance: [35.107 18.783]
Student: | 35.107 |
In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
[EX Q]: Find the first and last names of people who payed more than the rooms' base prices.
[EX A]: SELECT T1.firstname , T1.lastname FROM Reservations AS T1 JOIN Rooms AS T2 ON T1.Room = T2.RoomId WHERE T1.Rate - T2.basePrice > 0
[EX Q]: What are the name, latitude, and city of the station with the lowest latitude?
[EX A]: SELECT name , lat , city FROM station ORDER BY lat LIMIT 1
[EX Q]: Show all template type codes that are not used by any document.
[EX A]: | SELECT template_type_code FROM Templates EXCEPT SELECT template_type_code FROM Templates AS T1 JOIN Documents AS T2 ON T1.template_id = T2.template_id
|
You will be given a definition of a task first, then some input of the task.
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
SBlRKCPQwIaEtFToAo, ADomRSQlXZKCPQwIaEtFTdsurAdDKt
Output: | SBlRacefikpqttwoAo, ADomRSQlXZacefikpqttwdsurAdDKt |
Given the task definition and input, reply with output. In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[ 59.856 -45.013 78.546 75.146 52.636]
| 78.546 |
You will be given a definition of a task first, then some input of the task.
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
I_TURN_RIGHT I_TURN_RIGHT I_RUN I_TURN_RIGHT I_TURN_RIGHT I_RUN I_TURN_RIGHT I_TURN_RIGHT I_RUN I_TURN_RIGHT I_TURN_RIGHT I_TURN_RIGHT
Output: | turn right thrice after run opposite right thrice |
Definition: In this task, you are given a date in "mm/dd/yyyy" format. You need to check if the date is valid or not. Return 1 if it is valid, else return 0. A date is valid is the components month("mm"), day("dd") and year("yyyy") are all valid individually. A day(dd) is valid if it is greater than or equal to 1 and less than 30 or 31 depending upon the month(mm). Months which have 31 days are January, March, May, July, August, October, December. Rest of the months have 30 days except February which has 28 days if it is not a leap year and 29 days if it is a leap year. A month(mm) is valid if it lies in the range from 1 to 12 as there are 12 months in a year. A year is always valid if it is expressed in the form of "yyyy".
Input: 02/20/1646
Output: | 1 |
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
Example input: bYubMFxyTqR, AcDbMFxSnI
Example output: bYubfmxyTqR, AcDbfmxSnI
Example explanation: Here, 'bMFx' is the longest common substring in both the input strings 'bYubMFxyTqR' and 'AcDbMFxSnI'. Sorting it and converting to lowercase gives 'bfmx'. Replacing 'bfmx' instead of 'bMFx' in the two strings gives 'bYubfmxyTqR' and 'AcDbfmxSnI'
Q: rgMATKGwvvVDOlsXRPErNUTsjyMCDyrcyQALdAUh, GHWYmHiuLzbAmTCkvvVDOlsXRPErNUTsjyMSdQPNxzBeK
A: | rgMATKGwdejlmnoprrsstuvvvxyCDyrcyQALdAUh, GHWYmHiuLzbAmTCkdejlmnoprrsstuvvvxySdQPNxzBeK |
In this task, you are given a country name and you need to return the Top Level Domain (TLD) of the given country. The TLD is the part that follows immediately after the "dot" symbol in a website's address. The output, TLD is represented by a ".", followed by the domain.
Cuba | .cu |
Given a concept word, generate a hypernym for it. A hypernym is a superordinate, i.e. a word with a broad meaning constituting a category, that generalizes another word. For example, color is a hypernym of red.
[Q]: tongue
[A]: muscle
[Q]: stove
[A]: device
[Q]: grave
[A]: | death
|
Given the task definition, example input & output, solve the new input case.
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
Example: bYubMFxyTqR, AcDbMFxSnI
Output: bYubfmxyTqR, AcDbfmxSnI
Here, 'bMFx' is the longest common substring in both the input strings 'bYubMFxyTqR' and 'AcDbMFxSnI'. Sorting it and converting to lowercase gives 'bfmx'. Replacing 'bfmx' instead of 'bMFx' in the two strings gives 'bYubfmxyTqR' and 'AcDbfmxSnI'
New input case for you: zTKROCHxzwbpgPSoTmnuoYbnHYJGULrutOJDlbeMMERMp, ZwpFutILTmnuoYbnHYJGULrutOJDABkFW
Output: | zTKROCHxzwbpgPSobdghjjlmnnoorttuuuyylbeMMERMp, ZwpFutILbdghjjlmnnoorttuuuyyABkFW |
Instructions: In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Input: which course has most number of registered students?
Output: | SELECT T1.course_name FROM courses AS T1 JOIN student_course_registrations AS T2 ON T1.course_id = T2.course_Id GROUP BY T1.course_id ORDER BY count(*) DESC LIMIT 1 |
Definition: We would like you to assess the QUALITY of each of the following argument (discussing Death Penalty) and determine if the argument is Valid or Invalid. A valid argument is clearly interpretable and either expresses an argument, or a premise or a conclusion that can be used in an argument for the topic of death penalty. An invalid argument is a phrase that cannot be interpreted as an argument or not on the topic of death penalty.
Input: The person having been convicted of a crime punishable by death and subsequently sentenced to death should be put to death.
Output: | Valid |
Detailed Instructions: In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Q: Find the names of users whose emails contain ‘superstar’ or ‘edu’.
A: | SELECT name FROM user_profiles WHERE email LIKE '%superstar%' OR email LIKE '%edu%' |
Detailed Instructions: Given a concept word, generate a hypernym for it. A hypernym is a superordinate, i.e. a word with a broad meaning constituting a category, that generalizes another word. For example, color is a hypernym of red.
See one example below:
Problem: crystal
Solution: rock
Explanation: A crystal is a type of rock, so rock is a valid hypernym output.
Problem: alert
Solution: | warn |
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
[965, 448, 466, 509, 911, 379, 462, 313, 379, 7, 516, 5, 285, 918] | [509, 911, 379, 313, 379, 7, 5] |
Given the task definition, example input & output, solve the new input case.
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
Example: I_TURN_LEFT I_JUMP
Output: jump left
If the agent turned to the left and jumped, then the agent jumped to the left.
New input case for you: I_TURN_LEFT I_RUN I_JUMP
Output: | run left and jump |
Detailed Instructions: Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
Problem:I_LOOK I_LOOK I_LOOK I_TURN_RIGHT I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_TURN_RIGHT I_JUMP I_TURN_RIGHT I_TURN_RIGHT I_JUMP
Solution: | look thrice and jump opposite right thrice |
In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Ex Input:
List the name of the pilots who have flied for both a company that mainly provide 'Cargo' services and a company that runs 'Catering services' activities.
Ex Output:
SELECT T2.pilot FROM operate_company AS T1 JOIN flight AS t2 ON T1.id = T2.company_id WHERE T1.principal_activities = 'Cargo' INTERSECT SELECT T2.pilot FROM operate_company AS T1 JOIN flight AS t2 ON T1.id = T2.company_id WHERE T1.principal_activities = 'Catering services'
Ex Input:
List the weight of the body builders who have snatch score higher than 140 or have the height greater than 200.
Ex Output:
SELECT T2.weight FROM body_builder AS T1 JOIN people AS T2 ON T1.people_id = T2.people_id WHERE T1.snatch > 140 OR T2.height > 200
Ex Input:
Find the entry names of the catalog with the attribute that have the most entries.
Ex Output:
| SELECT t1.catalog_entry_name FROM Catalog_Contents AS t1 JOIN Catalog_Contents_Additional_Attributes AS t2 ON t1.catalog_entry_id = t2.catalog_entry_id WHERE t2.attribute_value = (SELECT attribute_value FROM Catalog_Contents_Additional_Attributes GROUP BY attribute_value ORDER BY count(*) DESC LIMIT 1)
|
Part 1. Definition
A ploynomial equation is a sum of terms. Here each term is either a constant number, or consists of the variable x raised to a certain power and multiplied by a number. These numbers are called weights. For example, in the polynomial: 2x^2+3x+4, the weights are: 2,3,4. You can present a polynomial with the list of its weights, for example, equation weights = [6, 4] represent the equation 6x + 4 and equation weights = [1, 3, 4] represent the equation 1x^2 + 3x + 4. In this task, you need to compute the result of a polynomial expression by substituing a given value of x in the given polynomial equation. Equation weights are given as a list.
Part 2. Example
x = 3, equation weights = [4, 2]
Answer: 14
Explanation: Here, the weights represent the polynomial: 4x + 2, so we should multiply 4 by 3, and add it to 2 which results in (4*3 + 2 =) 14.
Part 3. Exercise
x = 10, equation weights = [8, 3, 9]
Answer: | 839 |
Instructions: A ploynomial equation is a sum of terms. Here each term is either a constant number, or consists of the variable x raised to a certain power and multiplied by a number. These numbers are called weights. For example, in the polynomial: 2x^2+3x+4, the weights are: 2,3,4. You can present a polynomial with the list of its weights, for example, equation weights = [6, 4] represent the equation 6x + 4 and equation weights = [1, 3, 4] represent the equation 1x^2 + 3x + 4. In this task, you need to compute the result of a polynomial expression by substituing a given value of x in the given polynomial equation. Equation weights are given as a list.
Input: x = 6, equation weights = [6, 9, 7, 4, 2]
Output: | 9998 |
Definition: In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
Input: [288, 19, 509]
Output: | [19, 509] |
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
I_TURN_LEFT I_RUN I_TURN_LEFT I_RUN I_TURN_LEFT I_RUN I_TURN_LEFT I_RUN I_TURN_LEFT I_RUN I_TURN_LEFT I_RUN I_TURN_LEFT I_RUN I_TURN_LEFT I_RUN I_TURN_RIGHT I_TURN_RIGHT I_RUN I_TURN_RIGHT I_TURN_RIGHT I_RUN | run opposite right twice after run around left twice |
Part 1. Definition
In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
Part 2. Example
[-11, 2, 3]
Answer: -11
Explanation: The element with the largest absolute value is -11, since 11 > 3 > 2. This is a good example.
Part 3. Exercise
[-40.038 65.441 -7.158 78.306 -33.87 -59.529 74.882 10.044 62.142]
Answer: | 78.306 |
In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Example: Find the id and city of the student address with the highest average monthly rental.
Example solution: SELECT T2.address_id , T1.city FROM Addresses AS T1 JOIN Student_Addresses AS T2 ON T1.address_id = T2.address_id GROUP BY T2.address_id ORDER BY AVG(monthly_rental) DESC LIMIT 1
Example explanation: First we select the student's id and city of their address. Next, to find where each student lived we must join the "Addresses" table with the "Student_Addresses" table on rows with the same "address_id". Finally, we want to return the student address with the highest monthly rent. This is a good example.
Problem: What is the least popular kind of decor?
| Solution: SELECT T2.decor FROM Reservations AS T1 JOIN Rooms AS T2 ON T1.Room = T2.RoomId GROUP BY T2.decor ORDER BY count(T2.decor) ASC LIMIT 1 |
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
qLJsarRgpitycQkPoLshu, bFMoBFjWCwasarRgpitycQkPoLscLP | qLJacgikloppqrrsstyhu, bFMoBFjWCwaacgikloppqrrsstycLP |
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
Let me give you an example: bYubMFxyTqR, AcDbMFxSnI
The answer to this example can be: bYubfmxyTqR, AcDbfmxSnI
Here is why: Here, 'bMFx' is the longest common substring in both the input strings 'bYubMFxyTqR' and 'AcDbMFxSnI'. Sorting it and converting to lowercase gives 'bfmx'. Replacing 'bfmx' instead of 'bMFx' in the two strings gives 'bYubfmxyTqR' and 'AcDbfmxSnI'
OK. solve this:
lMkQvHgQZPcLiqDgKOUAuuzQqGYR, McjlXOLwyscLiqDgKOUAuuzWW
Answer: | lMkQvHgQZPacdgikloquuuzQqGYR, McjlXOLwysacdgikloquuuzWW |
Given the task definition, example input & output, solve the new input case.
We would like you to assess the QUALITY of each of the following argument (discussing Death Penalty) and determine if the argument is Valid or Invalid. A valid argument is clearly interpretable and either expresses an argument, or a premise or a conclusion that can be used in an argument for the topic of death penalty. An invalid argument is a phrase that cannot be interpreted as an argument or not on the topic of death penalty.
Example: The fact that you do not want to donate to these poor, needy people only shows me that you really do not care about the embryos
Output: Invalid
It is not an argument on the topic of death penalty.
New input case for you: No possible way to obtain a statistic like that and have any accuracy at all.
Output: | Invalid |
Definition: In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
Input: What is the average edispl of the cars of model volvo?
Output: | SELECT avg(T2.edispl) FROM CAR_NAMES AS T1 JOIN CARS_DATA AS T2 ON T1.MakeId = T2.Id WHERE T1.Model = 'volvo' |
Q: In this task you are expected to write an SQL query that will return the data asked for in the question. An SQL query works by selecting data from a table where certain conditions apply. A table contains columns where every row in that table must have a value for each column. Every table has a primary key that uniquely identifies each row, usually an id. To choose which columns are returned you specify that after the "SELECT" statement. Next, you use a "FROM" statement to specify what tables you want to select the data from. When you specify a table you can rename it with the "AS" statement. You can reference that table by whatever name follows the "AS" statement. If you want to select data from multiple tables you need to use the "JOIN" statement. This will join the tables together by pairing a row in one table with every row in the other table (Cartesian Product). To limit the number of rows returned you should use the "ON" statement. This will only return rows where the condition specified after the statement is true, this is usually an equals operator with primary keys. You can also use the "WHERE" statement to specify that only rows with column values statisfying a certain condition, should be returned. The "GROUP BY" statement will group rows together that have equal column values for whatever columns follows the statement. The "HAVING" statement will return groups that statisfy whatever condition follows the statement. Any column(s) being returned from grouped rows must either be an aggregate function, (AVG, MAX, COUNT, SUM, ...) of a column, or the column(s) that the data was grouped by. To sort the returned data you can use the "ORDER BY" command which will order the data by whatever aggregate function or column follows the statement. The "DESC" statement will sort in descending order and the "ASC" statement will sort in ascending order. Finally, you can use the "LIMIT" statement to return a certain number of rows. When "*" is used in an SQL statement every column is returned. For example, SELECT * FROM table WHERE attribute = 1, will select every column from rows with the attribute column equal to 1.
What are the titles of courses that are in the Statistics department but not the Psychology department?
A: | SELECT title FROM course WHERE dept_name = 'Statistics' EXCEPT SELECT title FROM course WHERE dept_name = 'Psychology' |
You will be given a definition of a task first, then an example. Follow the example to solve a new instance of the task.
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
bYubMFxyTqR, AcDbMFxSnI
Solution: bYubfmxyTqR, AcDbfmxSnI
Why? Here, 'bMFx' is the longest common substring in both the input strings 'bYubMFxyTqR' and 'AcDbMFxSnI'. Sorting it and converting to lowercase gives 'bfmx'. Replacing 'bfmx' instead of 'bMFx' in the two strings gives 'bYubfmxyTqR' and 'AcDbfmxSnI'
New input: MzpngZa, fKlpngVrY
Solution: | MzgnpZa, fKlgnpVrY |
Instructions: In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
Input: [5, 167, 253, 996, 832, 457, 816, 103, 71, 471, 139, 29, 661, 193, 502, 535]
Output: | [5, 167, 457, 103, 71, 139, 29, 661, 193] |
In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
One example: [-11, 2, 3]
Solution is here: -11
Explanation: The element with the largest absolute value is -11, since 11 > 3 > 2. This is a good example.
Now, solve this: [-33.354 96.679 -92.373]
Solution: | 96.679 |
Definition: A ploynomial equation is a sum of terms. Here each term is either a constant number, or consists of the variable x raised to a certain power and multiplied by a number. These numbers are called weights. For example, in the polynomial: 2x^2+3x+4, the weights are: 2,3,4. You can present a polynomial with the list of its weights, for example, equation weights = [6, 4] represent the equation 6x + 4 and equation weights = [1, 3, 4] represent the equation 1x^2 + 3x + 4. In this task, you need to compute the result of a polynomial expression by substituing a given value of x in the given polynomial equation. Equation weights are given as a list.
Input: x = 0, equation weights = [4, 5]
Output: | 5 |
Q: In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[-35.806 45.417 -96.279 -83.618 64.676 -92.962 36.774 -71.774]
A: | -96.279 |
Detailed Instructions: In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
Q: [315, 999, 923, 229, 109, 88, 633, 19]
A: | [229, 109, 19] |
Q: We would like you to assess the QUALITY of each of the following argument (discussing Death Penalty) and determine if the argument is Valid or Invalid. A valid argument is clearly interpretable and either expresses an argument, or a premise or a conclusion that can be used in an argument for the topic of death penalty. An invalid argument is a phrase that cannot be interpreted as an argument or not on the topic of death penalty.
I do feel that those who murder in cold blood would be more than deserving of the death penalty.
A: | Valid |
Given the task definition and input, reply with output. We would like you to assess the QUALITY of each of the following argument (discussing Death Penalty) and determine if the argument is Valid or Invalid. A valid argument is clearly interpretable and either expresses an argument, or a premise or a conclusion that can be used in an argument for the topic of death penalty. An invalid argument is a phrase that cannot be interpreted as an argument or not on the topic of death penalty.
Would you agree that putting an already dangerous person into a survival situation that requires more violence might make them even less equipped to deal with society once they get out?
| Valid |
Q: In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[-14.79 -29.871 48.695 59.926 -9.986 0.674 77.13 -38.909 -32.26
-0.758]
A: | 77.13 |
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
Input: Consider Input: [625, 65, 59, 8, 691, 3, 787, 157, 576, 164, 781, 601, 967, 283, 202, 713, 315, 822, 277, 547]
Output: [59, 691, 3, 787, 157, 601, 967, 283, 277, 547]
Input: Consider Input: [193, 867, 729, 694, 353, 509, 743, 211, 991, 681, 811, 926, 736, 244, 487]
Output: [193, 353, 509, 743, 211, 991, 811, 487]
Input: Consider Input: [181, 293, 5, 513, 7, 659, 808, 286, 229, 659, 211, 492, 103, 353, 443, 59]
| Output: [181, 293, 5, 7, 659, 229, 659, 211, 103, 353, 443, 59]
|
Given the task definition, example input & output, solve the new input case.
A ploynomial equation is a sum of terms. Here each term is either a constant number, or consists of the variable x raised to a certain power and multiplied by a number. These numbers are called weights. For example, in the polynomial: 2x^2+3x+4, the weights are: 2,3,4. You can present a polynomial with the list of its weights, for example, equation weights = [6, 4] represent the equation 6x + 4 and equation weights = [1, 3, 4] represent the equation 1x^2 + 3x + 4. In this task, you need to compute the result of a polynomial expression by substituing a given value of x in the given polynomial equation. Equation weights are given as a list.
Example: x = 3, equation weights = [4, 2]
Output: 14
Here, the weights represent the polynomial: 4x + 2, so we should multiply 4 by 3, and add it to 2 which results in (4*3 + 2 =) 14.
New input case for you: x = 4, equation weights = [2, 0, 5]
Output: | 37 |
Part 1. Definition
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
Part 2. Example
bYubMFxyTqR, AcDbMFxSnI
Answer: bYubfmxyTqR, AcDbfmxSnI
Explanation: Here, 'bMFx' is the longest common substring in both the input strings 'bYubMFxyTqR' and 'AcDbMFxSnI'. Sorting it and converting to lowercase gives 'bfmx'. Replacing 'bfmx' instead of 'bMFx' in the two strings gives 'bYubfmxyTqR' and 'AcDbfmxSnI'
Part 3. Exercise
YLlQzUqJOmCyrtRnJnFcfByYjTtBuNGmbncFvrSZj, iwUZnJnFcfByYjTtBuNvRseYtxPhdsyaMF
Answer: | YLlQzUqJOmCyrtRbbcffjjnnnttuyyGmbncFvrSZj, iwUZbbcffjjnnnttuyyvRseYtxPhdsyaMF |
Instructions: In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
Input: [653, 577, 499, 243, 59]
Output: | [653, 577, 499, 59] |
Given the task definition and input, reply with output. In mathematics, the absolute value of a number is the non-negative value of that number, without regarding its sign. For example, the absolute value of -2 is 2, and the absolute value of 5 is 5. In this task you will be given a list of numbers and you need to return the element with highest absolute value. If a negative and positive element have the same absolute value you should return the positive element. The absolute value for negative numbers can be found by multiplying them by -1. After finding the element with the maximum absolute value you should return the value of that element before you applied the absolute value.
[ 12.918 -72.189]
| -72.189 |
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
Ex Input:
I_TURN_LEFT I_TURN_LEFT I_TURN_LEFT I_JUMP I_TURN_LEFT I_JUMP
Ex Output:
jump left twice after turn opposite left
Ex Input:
I_TURN_LEFT I_WALK I_TURN_LEFT I_WALK I_TURN_LEFT I_WALK I_TURN_LEFT I_TURN_LEFT I_JUMP
Ex Output:
jump opposite left after walk left thrice
Ex Input:
I_TURN_RIGHT I_TURN_RIGHT I_TURN_RIGHT I_TURN_RIGHT I_RUN I_TURN_RIGHT I_RUN I_TURN_RIGHT I_RUN I_TURN_RIGHT I_RUN I_TURN_RIGHT I_RUN I_TURN_RIGHT I_RUN I_TURN_RIGHT I_RUN I_TURN_RIGHT I_RUN
Ex Output:
| run around right twice after turn right thrice
|
A ploynomial equation is a sum of terms. Here each term is either a constant number, or consists of the variable x raised to a certain power and multiplied by a number. These numbers are called weights. For example, in the polynomial: 2x^2+3x+4, the weights are: 2,3,4. You can present a polynomial with the list of its weights, for example, equation weights = [6, 4] represent the equation 6x + 4 and equation weights = [1, 3, 4] represent the equation 1x^2 + 3x + 4. In this task, you need to compute the result of a polynomial expression by substituing a given value of x in the given polynomial equation. Equation weights are given as a list.
x = 10, equation weights = [7, 9, 6] | 796 |
Instructions: In this task, you are given a country name and you need to return the Top Level Domain (TLD) of the given country. The TLD is the part that follows immediately after the "dot" symbol in a website's address. The output, TLD is represented by a ".", followed by the domain.
Input: Sweden
Output: | .se |
You will be given a definition of a task first, then some input of the task.
In this task, you are given a country name and you need to answer with the government type of the country, as of the year 2015. The following are possible government types that are considered valid answers: Republic, Parliamentary Coprincipality, Federal Republic, Monarchy, Islamic Republic, Constitutional Monarchy, Parlementary Monarchy, Federation.
Slovenia
Output: | Republic |
Given the task definition and input, reply with output. Read the given story and classify it as 'imagined', 'recalled', or 'retold'. If a story is imagined, the person who wrote the story is making it up, pretending they experienced it. If a story is recalled, the person who wrote the story really experienced it and is recalling it from memory. If a story is retold, it is a real memory like the 'recalled' stories, but written down much later after previously writing a 'recalled' story about the same events. So, recalled stories and retold stories will be fairly similar, in that they both were real experiences for the writer. Imagined stories have a more linear flow and contain more commonsense knowledge, whereas recalled stories are less connected and contain more specific concrete events. Additionally, higher levels of self reference are found in imagined stories. Between recalled and retold stories, retold stories flow significantly more linearly than recalled stories, and retold stories are significantly higher in scores for cognitive processes and positive tone.
It has been 3 months since I finally went back to college. So much has happened already! So many new friends and teachers. I moved into the dorms with a roommate. She is really nice and we have become best friends!! She has the same major as me so we are in most of the same classes together. We haven't been roommates for very long and I was alone for the first month. It was so fun when she moved in and we immediately were friends! She has also introduced me to a lot of people since I am not from here. One of the people will be getting me a job soon. College is a lot more expensive then I thought so I NEED a job right now! I haven't felt homesick yet! Last year I was for months and months. Maybe having a best friend as a roommate helps. She keeps me busy! We do have a break coming up soon so I get to go home to see my family for a couple weeks. I really should start saving up for that. Time to get back to studying. Until tomorrow.
| imagined |
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
Q: I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_LEFT I_WALK
A: walk left after walk around right twice
****
Q: I_TURN_RIGHT I_TURN_RIGHT I_TURN_RIGHT I_TURN_RIGHT I_TURN_RIGHT I_TURN_RIGHT I_TURN_RIGHT I_RUN I_TURN_RIGHT I_RUN
A: run right twice after turn opposite right thrice
****
Q: I_TURN_RIGHT I_RUN I_JUMP I_JUMP I_JUMP
A: | jump thrice after run right
****
|
Definition: This task is to find the number of 'For' loops present in the given cpp program.
Input:
int cut(int m,int l){
int sum=1;
for(int i=l;i<=sqrt((double)m/l);i++){
if((m/l)%i==0){
sum+=cut(m/l,i);
}
}
return sum;
}
int main (){
int n;
cin>>n;
for(int i=0;i<n;i++){
int t=0;
cin>>t;
cout<<cut(2*t,2);
if(i<n-1) cout<<endl;
}
}
Output: | 2 |
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
[928, 315, 285, 322, 313, 73, 197, 652, 430] | [313, 73, 197] |
Given the task definition and input, reply with output. In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
[760, 617, 503, 41, 564, 799, 210, 971, 829, 330, 328, 953, 109, 199]
| [617, 503, 41, 971, 829, 953, 109, 199] |
A ploynomial equation is a sum of terms. Here each term is either a constant number, or consists of the variable x raised to a certain power and multiplied by a number. These numbers are called weights. For example, in the polynomial: 2x^2+3x+4, the weights are: 2,3,4. You can present a polynomial with the list of its weights, for example, equation weights = [6, 4] represent the equation 6x + 4 and equation weights = [1, 3, 4] represent the equation 1x^2 + 3x + 4. In this task, you need to compute the result of a polynomial expression by substituing a given value of x in the given polynomial equation. Equation weights are given as a list.
x = 4, equation weights = [4, 9, 3] | 103 |
In this task you will be given a list of integers. You should remove any integer that is not prime. A prime integer is an integer that is only divisible by '1' and itself. The output should be the list of prime numbers in the input list. If there are no primes in the input list an empty list ("[]") should be returned.
--------
Question: [534, 373, 152, 780, 233, 43, 7, 241, 631, 465, 277, 518, 601, 583, 521, 524, 494]
Answer: [373, 233, 43, 7, 241, 631, 277, 601, 521]
Question: [383, 830, 319, 199, 639, 773, 569, 563, 907]
Answer: [383, 199, 773, 569, 563, 907]
Question: [131, 927, 151, 141, 587, 23, 41, 524, 837, 69, 563, 941, 746, 808, 153, 619, 39, 841, 34, 67]
Answer: | [131, 151, 587, 23, 41, 563, 941, 619, 67]
|
In this task, you are given two strings A,B. You must perform the following operations to generate the required output list: (i) Find the longest common substring in the strings A and B, (ii) Convert this substring to all lowercase and sort it alphabetically, (iii) Replace the substring at its respective positions in the two lists with the updated substring.
Q: zMBReUyCQRSenDI, CQmCyCQRSenSe
A: | zMBReUcenqrsyDI, CQmCcenqrsySe |
Given a sequence of actions to navigate an agent in its environment, provide the correct command in a limited form of natural language that matches the sequence of actions when executed. Commands are lowercase and encapsulate the logic of the sequence of actions. Actions are individual steps that serve as the building blocks for a command. There are only six actions: 'I_LOOK', 'I_WALK', 'I_RUN', 'I_JUMP', 'I_TURN_LEFT', and 'I_TURN_RIGHT'. These actions respectively align with the commands 'look', 'walk', 'run', 'jump', 'turn left', and 'turn right'. For commands, 'left' and 'right' are used to denote the direction of an action. opposite turns the agent backward in the specified direction. The word 'around' makes the agent execute an action while turning around in the specified direction. The word 'and' means to execute the next scope of the command following the previous scope of the command. The word 'after' signifies to execute the previous scope of the command following the next scope of the command. The words 'twice' and 'thrice' trigger repetition of a command that they scope over two times or three times, respectively. Actions and commands do not have quotations in the input and output.
--------
Question: I_JUMP I_JUMP I_JUMP I_TURN_RIGHT I_TURN_RIGHT I_RUN
Answer: run opposite right after jump thrice
Question: I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_RIGHT I_WALK I_TURN_LEFT I_TURN_LEFT I_RUN I_TURN_LEFT I_TURN_LEFT I_RUN
Answer: walk around right and run opposite left twice
Question: I_TURN_LEFT I_TURN_LEFT I_RUN I_TURN_LEFT I_TURN_LEFT I_RUN I_TURN_LEFT I_TURN_LEFT I_RUN I_TURN_LEFT I_TURN_LEFT I_TURN_LEFT
Answer: | run opposite left thrice and turn left thrice
|
Read the given message of a sender that is intended to start a conversation, and determine whether it was written by a 'Bot' or by a 'Human'. Typically, bots will have a more disjointed manner of speaking, and will make statements that don't relate to each other, don't make coherent sense, or otherwise appear unnatural. Human will make statements in a more or less coherent and logical way. Since these messages are supposed to be conversation openers, humans will generally start sensibly with a hello or an introduction. Humans may also ask why the other person is not responding. Bots, however, may act as if they are in the middle of a nonsensical conversation.
Example Input: SENDER A: Good to see you!
SENDER A: Where did i live?
Example Output: Bot
Example Input: SENDER A: hi
SENDER A: i'm a boy
SENDER A: do you like coffe
Example Output: Human
Example Input: SENDER A: Why? Because I got the kids three days a week and if I had a fulltime job...
Example Output: | Bot
|
Teacher:In this task, you are given a country name and you need to return the Top Level Domain (TLD) of the given country. The TLD is the part that follows immediately after the "dot" symbol in a website's address. The output, TLD is represented by a ".", followed by the domain.
Teacher: Now, understand the problem? Solve this instance: Mexico
Student: | .mx |
Subsets and Splits