question_id
int64 8.14k
12k
| question
stringlengths 23
216
| A
stringlengths 1
233
| B
stringlengths 1
216
| C
stringlengths 1
219
⌀ | D
stringlengths 1
219
⌀ | E
stringlengths 1
250
⌀ | answer
null | explanation
null | category
stringclasses 2
values |
|---|---|---|---|---|---|---|---|---|---|
8,138 | When can a gNB transmit a DL transmission(s) on a channel after initiating a channel occupancy? | Regardless of the duration of the gap between the DL transmission(s) and any previous transmission(s) corresponding to the channel occupancy initiated by the gNB. | If the gap between the DL transmission(s) and any previous transmission(s) corresponding to the channel occupancy initiated by the gNB is more than a threshold. | Both option 1 and option 2 | None of the above | null | null | null | Standards specifications |
8,153 | What does OTA REFSENS requirement ensure? | The accuracy of the receiver in filtering out out-of-band signals. | The ability of the receiver to receive a wanted signal in the presence of an interfering signal. | The receiver's ability to receive an unwanted signal in the presence of a wanted signal. | The accuracy of the receiver in filtering out adjacent channel signals. | The minimum mean power received at the RIB for a specified reference measurement channel. | null | null | Standards specifications |
8,156 | What is the role of MDA MnS producer in the management function? | Producer of NWDAF data | Consumer of MDA reports | Producer of MDA reports | Consumer of NWDAF data | Producer of RAN control data | null | null | Standards specifications |
8,160 | What type of subcarrier spacing requirements does an NB-IoT Base Station support? | 15 kHz subcarrier spacing requirements only | 3.75 kHz subcarrier spacing requirements only | Both 15 kHz and 3.75 kHz subcarrier spacing requirements | No subcarrier spacing requirements | null | null | null | Standards specifications |
8,165 | What is the purpose of the IAB-node OAM procedure? | To activate and deactivate UE traces in the gNB-DU and the gNB-CU-UP | To handle the release of an IAB-node in an orderly fashion | To allocate IP addresses for IAB-nodes | To exchange commands, configuration data, and software downloads between the IAB-node and its OAM system | null | null | null | Standards specifications |
8,168 | What is the purpose of the Control Plane Protocol Stack for the service-based interface? | To manage NAS transport procedures | To manage user plane PDU Session establishment | To manage service-based interfaces in the 5GC | To manage session management between network functions in the 5GC | To establish a secure connection between the UPF and the SMF | null | null | Standards specifications |
8,186 | What is the purpose of the Diameter Load Control Mechanism? | To provide dynamic load balancing in Diameter nodes | To prevent overload in Diameter nodes | To convey load information between Diameter nodes | All of the above | None of the above | null | null | Standards specifications |
8,200 | What message does the AMF send to the NG-RAN during mobility registration, AM policy modification, and handover procedures? | 5G access stratum time distribution indication | Uu time synchronization error budget | Clock quality detail level | UE Context Modification Request | N2 connection | null | null | Standards specifications |
8,202 | How many SSB bursts are used for Loop convergence in the IDLE/INACTIVE state? | 1 | 2 | 3 | 4 | 5 | null | null | Standards specifications |
8,210 | What is the purpose of a Local Coordinate System (LCS)? | To determine the placement of an array within the GCS | To define the orientation of an array antenna with respect to a Global Coordinate System (GCS) | To define the vector far-field of an antenna element in an array | To map the vector fields of the array elements from the GCS to the LCS | null | null | null | Standards specifications |
8,211 | What is the cardinality rule for EECs? | One or more EEC(s) may be located in a UE | One or more EEC(s) may be located in an EDN | One or more EEC(s) may be deployed to support one EDN | One or more EEC(s) may be deployed by a PLMN operator | null | null | null | Standards specifications |
8,213 | Which physical layer procedure is involved in cell search? | Channel Access procedures | HARQ related procedures | Power control | Random access related procedures | Relay related procedures | null | null | Standards specifications |
8,216 | What is the minimum throughput requirement for the dynamic range of SAN supporting standalone NB-IoT operation? | 95% of the maximum throughput of the reference measurement channel. | 80% of the maximum throughput of the reference measurement channel. | 100% of the maximum throughput of the reference measurement channel. | 90% of the maximum throughput of the reference measurement channel. | 85% of the maximum throughput of the reference measurement channel. | null | null | Standards specifications |
8,223 | What information does the HandoverPreparationInformation message transfer? | The SCG radio configuration for one or more candidate cells for Conditional PSCell Addition (CPA) or Conditional PSCell Change (CPC) | The handover command as generated by the target gNB | The NR RRC information used by the target gNB during handover preparation or UE context retrieval | The radio paging information, covering both upload to and download from the 5GC, and between gNBs | The UE radio access capability information, covering both upload to and download from the 5GC | null | null | Standards specifications |
8,230 | How many DL and UL non-anchor carriers can be configured in a new NB-IoT SIB? | 5 | 10 | 15 | 20 | 25 | null | null | Standards overview |
8,231 | What is the purpose of the Non-Uniform TRP Measurement Grids? | To calculate the CDF of the EIRP/EIS distribution in 3D | To reduce the number of PC1 TRP grid points | To determine the RX beam peak direction | To perform TRP measurements taken on the sampling grid | To perform 3D Throughput/RSRP/EIS scans for RX beam peak direction | null | null | Standards specifications |
8,243 | What should be done with an AI/ML model before deployment in the Model Inference function? | No training, validation, or testing is needed | It should be validated and tested, but training is not required | It should be trained, validated, and tested | No AI/ML models should be deployed in the Model Inference function | null | null | null | Standards specifications |
8,261 | What is the objective of the Extension for headset interface tests of UE work item? | To extend audio test specifications to analogue and digital electrical interfaces | To support interoperability between the interface and headsets | To define the electrical interfaces for headsets | To establish a unified and highly comparable test methods for interfaces | To validate performance requirements and objectives in measurement series | null | null | Standards overview |
8,263 | What architecture enhancement work item is responsible for specifying V2X architectures and functional entities? | V2XARC | V2XLTE | V2XCT | V2XLTE-Sec | V2X-CT | null | null | Standards overview |
8,266 | What charging principle should be possible to apply during an active session? | "Calling Party Pays" charging principle | Charge a 3rd party for all or part of the session | Split charging between parties | Charge for each component separately in a session | Different rules for session setup and session resources | null | null | Standards specifications |
8,269 | What is the main purpose of the Charging Function (CHF) in the 5G Phase 1 architecture? | To provide Service Based Interface (SBI) for charging | To enhance the existing Diameter based Ro/Rf charging architecture | To introduce SMS charging in the 5G system architecture | To support management and virtualization aspects of 5G networks | To define the Network Resource Model (NRM) for 5G networks and network slicing | null | null | Standards overview |
8,272 | What is the goal of the ETSUN (Enhancing Topology of SMF and UPF in 5G Networks) feature? | To enhance the capability of 5GS architecture for UPF control | To enable the 3GPP system to support SMF control in different PLMNs | To improve the topology of AMF and SMF in 5G networks | To implement V2X Application Server functionalities in the 5G network | null | null | null | Standards overview |
8,285 | What are the demodulation enhancements specified in Rel-16 for NR support of high-speed train scenarios? | Demodulation requirements for HST-SFN | Demodulation requirements for HST single tap | Demodulation requirements for multi-path fading channel | All of the above | None of the above | null | null | Standards overview |
8,289 | Which identifier contains a Network Access Identifier (NAI) when a network-specific identifier is used? | IMSI | SUPI | GCI | PEI | SUCI | null | null | Standards specifications |
8,293 | What are the requirements for Massive Internet of Things (mIoT) in the 5G system? | High data rates and traffic/connection density | Low latency and high service availability | Very high traffic densities of devices | Efficient content delivery | Flexible network operations | null | null | Standards overview |
8,301 | When can exempted transmissions from sensing be performed? | When a gNB/UE intends to transmit a discovery burst. | When a UE transmits the first message in a random access procedure. | Both option 1 and option 2 | None of the above | null | null | null | Standards specifications |
8,307 | What functions should the eMBMS service layer support for TV services? | Traffic demand management and channel change times | Network encryption and security | Accessible formats and regulatory mandates | Efficient delivery and extensibility | Media metadata and non-real-time content | null | null | Standards specifications |
8,310 | What does the Service Experience Contribution Weight indicate? | Application Server Address | S-NSSAI value | DNN value | Relative importance of UE's Service Experience | Area of Interest | null | null | Standards specifications |
8,311 | What is used for downlink power control? | Timing Advance | Channel quality | Transmit power reference | Received signal strength | Transmit power control commands | null | null | Standards specifications |
8,314 | What does a '1' value for the Wake-up indication bit, when reported to higher layers, indicate? | To activate the firstOutsideActiveTimeBWP-Id for the UE. | To not start the drx-onDurationTimer for the next long DRX cycle. | To activate the dormantBWP-Id for the UE. | To start the drx-onDurationTimer for the next long DRX cycle. | null | null | null | Standards specifications |
8,318 | What is the purpose of the NWDAF in the charging architecture? | Physical implementation of charging interfaces | Consumption of management services | Definition of logical charging functions | Specification of reference points | null | null | null | Standards specifications |
8,319 | When can the Location Service of a specific user be barred? | During provisioning | During withdrawal | During invocation | Anytime | Only for emergency services | null | null | Standards specifications |
8,335 | Where can full details of operation under the 'Access class barred list' be found? | TS 36.331 | TS 35.331 | TS 22.011 | TS 24.105 | TS 31.102 | null | null | Standards specifications |
8,342 | What is the purpose of the Access Traffic Steering, Switch, and Splitting (ATSSS) feature? | To establish a PDU Session that can use one 3GPP access network and one non-3GPP access network simultaneously | To provide QoS control on wireline access networks | To support the provisioning of configuration and remote management of 5G-RG | To enhance the NG interface protocols for Trusted Non-3GPP Access and Wireline Access | To specify charging requirements and procedures for 5WWC scenarios | null | null | Standards overview |
8,347 | What are the characteristics of the interfering signals for standalone NB-IoT? | A PDSCH containing data and reference symbols | A PUSCH containing data and reference symbols | A NPUSCH containing data and reference symbols | A PRACH containing data and reference symbols | null | null | null | Standards specifications |
8,350 | What does the Paging Cause Indication feature in a Multi-USIM UE and network support? | Paging for voice service | Paging for data service | Connection release | Paging restriction | All of the above | null | null | Standards specifications |
8,354 | What is the purpose of the Converged Charging System (CCS)? | To monitor and control the number of registered UEs per network slice | To allocate resources to a slice in case of slice resources shortage | To perform per tenant charging based on Network Slice usage | To provide Target NSSAI and RFSP to RAN to steer the UE to another cell | To support slice specific RACH configuration | null | null | Standards overview |
8,359 | Which 3GPP specification provides management provisions and solutions for edge computing? | TS 23.501 | TS 23.558 | TS 28.538 | TS 33.558 | TS 24.558 | null | null | Standards overview |
8,360 | What priority treatment is provided to MPS-subscribed UEs before the MPS application service session invocation? | Priority treatment for access and attachment to the network | Priority treatment for QoS rule enforcement | Priority treatment for incoming sessions from other networks | Priority treatment for supplementary services | Priority treatment for handover | null | null | Standards specifications |
8,361 | What is the default media handling capability of the IMS Multimedia Telephony service? | Adding and removing individual media components in a communication | Supporting synchronized video and speech in real time | Full duplex speech and real-time text communication | Allowing users to add and delete identities for outgoing communications | null | null | null | Standards specifications |
8,362 | Which data is required as feedback for mobility optimization? | QoS parameters of the handed-over UE | Resource status information updates from target NG-RAN | Performance information from target NG-RAN | UE mobility information | All of the above | null | null | Standards specifications |
8,363 | Which IE shall be included in the Detach request (mobile terminated detach) message if the detach reason has to be indicated to the MS? | Authentication Parameter AUTN | P-TMSI signature | GMM cause | Replayed MS network capability | null | null | null | Standards specifications |
8,364 | What function in NG-RAN supports the positioning functionality? | RACH Optimization Function | PCI Optimization Function | Support of dynamic PTP and PTM switching | Support for CCO | Support for NR MBS | null | null | Standards specifications |
8,369 | Which document specifies the use cases and requirements for 5G Trace in the management of 5GC and NG-RAN? | TS 32.421 | TS 32.422 | TS 32.423 | TS 28.531 | TS 28.554 | null | null | Standards overview |
8,371 | Which identity is used to control the power of PUSCH? | SFI-RNTI | TPC-PUCCH-RNTI | TPC-PUSCH-RNTI | TPC-SRS-RNTI | RA-RNTI | null | null | Standards specifications |
8,381 | What is the purpose of the Control and User Plane Separation of EPC nodes work item? | To reduce the latency for services such as social networks or web browsing. | To separate the S/P-GW and the TDF functionality into user plane functions and control plane functions. | To enable flexible placement of user plane functions. | To specify the architecture reference model for control and user plane separation. | null | null | null | Standards specifications |
8,389 | Which function is responsible for routing of User Plane data towards Serving Gateway? | Radio Bearer Control | IP and Ethernet header compression | Scheduling and transmission of paging messages | Routing of User Plane data | Transport level packet marking in the uplink | null | null | Standards specifications |
8,396 | Where does AI/ML functionality reside within the current RAN architecture? | Only in the Model Training function | Only in the Model Inference function | Both in the Model Training and Model Inference functions | It depends on deployment and the specific use cases | null | null | null | Standards specifications |
8,401 | What kind of traffic should a Shared GERAN or UTRAN be able to differentiate? | Signalling traffic only | User traffic only | Both signalling and user traffic | None of the above | null | null | null | Standards specifications |
8,403 | What is the purpose of the Advice of Charge (AoC) supplementary service? | To distribute tariff information to network elements | To provide charging information for wholesale billing | To indicate the occurrence of new charges to the user | To administer on-line charging data stored in the network nodes | To determine network utilization charges for home subscribers | null | null | Standards specifications |
8,405 | What service does AF invoke to request the DNAI information? | NEF service Nnef_DNAIMapping_Subscribe | Nudr_DM_Subscribe | UDR notifies the NEF | Nnef_DNAIMapping_Subscribe | null | null | null | Standards specifications |
8,411 | Which access control mechanism specifically applies to CSFB? | Access Class Barring | Service Specific Access Control | Extended Access Barring | Application Specific Congestion Control for Data Communication | Access Control for Indirect 3GPP Communications | null | null | Standards specifications |
8,417 | What is the purpose of sidelink synchronization using SLSS signals? | To align time and frequency references between UEs | To support inter-PLMN operations | To increase the maximum bandwidth of V2X services | To enable simultaneous V2X operations over multiple carriers | To reduce latency for V2X services | null | null | Standards overview |
8,426 | What is the purpose of a Topological Service Area? | To define a group of UE within a PLMN domain | To identify a set of parameters associated with an EEC | To specify access to a functional entity in the EDN | To translate one UE location value to another | To define the location of the UE within the network | null | null | Standards specifications |
8,429 | What must be complied with regarding privacy? | Multiple layers of permissions | Location information availability to the network service provider | Specific local, national, and regional privacy regulations | All of the above | null | null | null | Standards specifications |
8,434 | What does End-to-End Priority Treatment include? | Priority treatment by the origination network only | Priority treatment by all transit networks only | Priority treatment by the originating and termination networks only | Priority treatment by all MPS capable networks involved in the MPS session path | null | null | null | Standards specifications |
8,437 | What is the purpose of the double differential technique with PRU in NR carrier phase positioning? | To improve the accuracy of carrier phase measurements | To mitigate the impact of initial phases of the transmitter and receiver | To eliminate measurement errors in DL PRS signals | To enable multipath mitigation for carrier phase measurements | To enhance the accuracy of legacy positioning measurements | null | null | Standards specifications |
8,445 | What does Edge Relocation refer to? | The relocation of UE mobility | The procedures supporting user plane path optimization | The relocation of AF instances in the network | The procedures supporting EAS changes and/or PSA UPF relocation | null | null | null | Standards specifications |
8,455 | When is the Nadrf_DataManagement_RetrievalRequest service operation used? | To request the ADRF to store data or analytics | To request the ADRF to retrieve stored data or analytics | To request the ADRF to subscribe to data or analytics | To request the ADRF to delete stored data or analytics | To request the ADRF to update stored data or analytics | null | null | Standards specifications |
8,456 | What is the priority of NG-RAN SA, EN-DC, and MR-DC in RAN3? | NG-RAN SA is prioritized; EN-DC and MR-DC are down-prioritized | EN-DC and MR-DC are prioritized; NG-RAN SA is down-prioritized | All are equally prioritized in RAN3 | NG-RAN SA, EN-DC, and MR-DC are not part of RAN3 | null | null | null | Standards specifications |
8,460 | What is the purpose of the DTX/DRX enhancements in CELL_FACH state? | To improve battery life of smart phones | To improve resource utilization and latency | To enhance uplink coverage of cells | To support dual carrier operation | To improve downlink data transmission | null | null | Standards specifications |
8,462 | What determines the selection of a Dedicated Core Network in GERAN? | Cellular network operator | UE capabilities | Geographical location of the device | UE usage type obtained from subscription data | Signal strength of the device | null | null | Standards overview |
8,476 | What is the purpose of the UECapabilityEnquirySidelink message? | To include the system information transmitted by a UE via SL-BCH | To indicate the failure of a PC5 RRC AS reconfiguration | To transfer UE radio access capabilities | To include sidelink DRX assistance information used to determine the sidelink DRX configuration | To request UE sidelink capabilities | null | null | Standards specifications |
8,485 | In which state should the UE be for the NG-RAN to send a Location Report including the UE's last known location with timestamp? | UE state does not matter for this type of Location Report | CM-CONNECTED with RRC_CONNECTED state | CM-IDLE state | CM-DISCONNECTED state | CM-CONNECTED with RRC_INACTIVE state | null | null | Standards specifications |
8,493 | What is the purpose of UE Capability Segmentation? | To reduce the size of the capability information message | To encode the capability information message | To reassemble the capability information message | To divide the capability information message into segments | null | null | null | Standards overview |
8,499 | Which reference channels are used to specify the radiated performance requirements for the SAN? | Fixed reference channels defined in Recommendation ITU-R P.618 | Reference channels defined in TS 38.108 | Dynamic reference channels defined in Recommendation ITU-R P.618 | Fixed reference channels defined in TS 38.108 | null | null | null | Standards specifications |
8,503 | What is the purpose of Autonomous Networks? | To measure PRB usage for MIMO | To optimize inter-system load balancing | To support network automation | To calculate the energy efficiency of base stations | null | null | null | Standards overview |
8,508 | What does the Location Reporting Control message include? | UE Location | UE Presence in Area Of Interest | Request Reference ID | All of the above | None of the above | null | null | Standards specifications |
8,523 | Which statement is true regarding the communication path between PIN Elements? | The communication path between PIN Elements can only use licensed spectrum. | The communication path between PIN Elements can only use unlicensed spectrum. | The communication path between PIN Elements can use licensed and unlicensed spectrum as well as 3GPP and non-3GPP access. | The communication path between PIN Elements can use any suitable non-3GPP technology. | The communication path between PIN Elements can only use Ethernet, optical, or WLAN technology. | null | null | Standards specifications |
8,525 | What is the purpose of charging data transfer in offline charging? | To transfer charging events from CTF to OCF via Ro. | To transfer charging events from CGF to BD via Bx. | To transfer charging events from CTF to CDF via Rf. | To transfer charging events from CEF to CHF via Nchf. | null | null | null | Standards specifications |
8,531 | Which modulation schemes are used for PUCCH and NPUSCH transmission? | QPSK and 16QAM | QPSK and 64QAM | QPSK and 256 QAM | π/2-BPSK and QPSK | π/2-BPSK and π/4-QPSK | null | null | Standards specifications |
8,538 | What is the purpose of NF Service Sets? | To provide distribution and redundancy for NF Service instances | To provide scalability and statelessness to NF Service instances | To group equivalent NF Services into interchangeable sets | To group NF Service instances within a NF instance | To transfer NF context between AMFs | null | null | Standards specifications |
8,541 | What is the purpose of the Remote Interference Management (RIM) function? | To detect and mitigate coverage and cell edge interference issues. | To optimize the Physical Random Access Channel (PRACH) configuration. | To manage cross-link interference in non-split gNB architecture. | To support radio access network sharing. | To support positioning functionality. | null | null | Standards specifications |
8,546 | What causes the UE to fail the mobility from NR procedure? | A failure to establish the connection to the target radio access technology | A protocol error in the inter RAT information | An emergency services fallback indication | An ongoing emergency call with no suitable E-UTRA cell available | An inter-RAT measurement reporting failure | null | null | Standards specifications |
8,552 | Which physical channel carries Scheduling Request (SR)? | PDSCH | SPUCCH | PUSCH | PUCCH | null | null | null | Standards specifications |
8,568 | How can the user plane path be re-configured during Edge Relocation? | PDU Session re-establishment using SSC mode 2/3 mechanisms | Local PSA UPF relocation using UL CL and BP mechanisms | Both PDU Session re-establishment and Local PSA UPF relocation | None of the above | null | null | null | Standards specifications |
8,570 | What can the AF subscribe to from NEF to assist its application AI/ML operations? | Session inactivity time monitoring event | Traffic volume exchanged between the UE and the AI/ML application server | Both session inactivity time monitoring event and traffic volume exchanged between the UE and the AI/ML application server | NEF monitoring events related to AI/ML operations | UE IP address | null | null | Standards specifications |
8,576 | What message is sent by the MS to the network in order to perform a GPRS or combined GPRS attach? | Attach reject | Attach accept | Attach complete | Attach request | null | null | null | Standards specifications |
8,578 | In Type 1 DL channel access procedures, when does the eNB/gNB transmit a transmission? | After sensing the channel to be busy during the sensing slot durations of a defer duration | After sensing the channel to be idle during the sensing slot durations of a defer duration | After sensing the channel to be idle during the entire defer duration | After sensing the channel to be busy during the entire defer duration | null | null | null | Standards specifications |
8,579 | Which mobility is supported for cell reselection between NR RRC_IDLE and E-UTRA RRC_IDLE? | Intra 5GC | From 5GC to EPC | From EPC to 5GC | NR-UTRA mobility | NR-E-UTRA mobility | null | null | Standards specifications |
8,598 | What is the maximum number of UEs that an RSU can communicate with according to requirement R.5.1-022? | 50 UEs | 100 UEs | 150 UEs | 200 UEs | 250 UEs | null | null | Standards specifications |
8,600 | What guides the target PLMN selection for a UE when its registered PLMN is not available in the target cell? | SNA Access Information IE | Equivalent PLMNs list | Handover restriction list | Common PLMN-id broadcast | IMSI | null | null | Standards specifications |
8,601 | Which sublayer is responsible for transfer of upper layer PDUs? | MAC sublayer | RLC sublayer | PDCP sublayer | SDAP sublayer | null | null | null | Standards specifications |
8,611 | What is the requirement for voice call continuity during emergency calls? | Voice call continuity for emergency calls is applicable to dual radio UEs only | Voice call continuity for emergency calls is applicable to single radio UEs only | Voice call continuity for emergency calls is applicable to both dual radio and single radio UEs | Voice call continuity is not supported during emergency calls | null | null | null | Standards specifications |
8,614 | What is the value of REFSENS used in the SNR calculation? | -82.8 dBm/50 MHz | 0.7 dB | 6 dB | 14.4 dB | null | null | null | Standards specifications |
8,617 | How are subsequent UL transmissions handled in the SDT procedure? | The network schedules subsequent UL transmissions using dynamic assignments. | The UE can initiate subsequent UL transmissions without any confirmation. | The UE cannot initiate subsequent UL transmissions. | The network schedules subsequent UL transmissions using dynamic grants. | The UE can initiate subsequent UL transmissions only after receiving confirmation for the initial transmission. | null | null | Standards specifications |
8,620 | What determines the MCS of the PUSCH transmission? | The channel access type | The frequency hopping flag | The transport block size | The power of the PUSCH transmission | The first sixteen indexes of the applicable MCS index table for PUSCH | null | null | Standards specifications |
8,627 | What is the purpose of timing advance in uplink transmission? | To advance/delay UE timings of transmissions to compensate for propagation delay | To synchronize UE transmissions with the receiver window of the eNB | To adjust the power spectral density of uplink transmissions | To select the appropriate modulation and channel coding rate | To allocate power to each carrier group in power control mode 1 | null | null | Standards specifications |
8,635 | What is the purpose of Explicit Congestion Notification (ECN) in 5G? | To identify GBR and non-GBR flows | To allocate and retain resources for QoS flows | To support reliable and low-delay data transfer | To enable congestion control in the network | null | null | null | Standards specifications |
8,636 | What is the purpose of L2 measurement? | To optimize inter-system load balancing | To enhance energy efficiency | To measure PRB usage for MIMO | To improve mobility optimization | null | null | null | Standards overview |
8,638 | What are the requirements for network and system selection for multi-mode terminals with 3GPP capability? | To comply with 3GPP specifications and ensure fair competition environment | To prioritize network selection based on system capabilities | To minimize the impact on 3GPP protocol requirements | To include network priority mechanisms | To support ping-pong between systems | null | null | Standards specifications |
8,639 | What does EAS bundle ID establish? | An association between EECs | An association between EESs | An association between EASs | An association between UE Groups | An association between EASs belonging to the same bundle | null | null | Standards specifications |
8,641 | What is the purpose of exposing monitoring and status information of an AI-ML session to a third-party AI/ML application? | To offload computation-intensive parts to network endpoints | To monitor model performance at the UE | To predict and expose predicted network condition changes | To assist in determining member(s) of a group of UEs | To determine an in-time transfer of AI/ML model | null | null | Standards specifications |
8,650 | What does the IAB-donor-CU do in step 1 of the IAB BH RLC channel establishment procedure? | Receives a UE CONTEXT MODIFICATION REQUEST message from the IAB-donor-DU | Sends a DL RRC MESSAGE TRANSFER message to the IAB-donor-DU | Sends a UE CONTEXT MODIFICATION REQUEST message to the IAB-donor-DU | Receives a DL RRC MESSAGE TRANSFER message from the IAB-donor-DU | null | null | null | Standards specifications |
8,654 | What is the purpose of provisioning GNSS (Global Navigation Satellite System) integrity information in 3GPP systems? | To facilitate hybrid positioning methods | To increase the effective bandwidth | To improve the simplicity of angle estimation | To exchange anticipated event information that may compromise positioning | To detect line-of-sight/non-line-of-sight | null | null | Standards overview |
8,655 | What type of messages may be fragmented in the control plane for untrusted non-3GPP access? | Identity messages | Handover messages | NAS-MM messages | EAP messages | Large NAS messages | null | null | Standards specifications |
8,657 | What is the purpose of the 5G VN Group management? | To configure the External Group ID and Internal Group ID | To define the parameters of the 5G VN group data | To manage the identification and membership of 5G VN groups | To provide secondary authentication and authorization for the 5G VN group | To configure the Maximum Group Data Rate | null | null | Standards specifications |
8,662 | What is the purpose of an alternative route in the context of routing the subscription identity back to its Home Environment? | To determine the lowest cost to the end user. | To reach a given Home Environment. | To maintain a list of all known Home Environments. | To establish a commercial roaming agreement with the serving network operators. | To enable interworking between the home environment and serving network operators. | null | null | Standards specifications |
8,663 | What is the format of the new password introduced in the 'Password-based service activation for IMS Multimedia Telephony service' work item? | A four digit PIN code | A username and password combination | A biometric authentication | A one-time password | A public/private key pair | null | null | Standards specifications |
8,665 | How can the relay UE selection criteria preferences be configured in the Evolved ProSe Remote UE? | By the home operator | By the user | By a combination of the home operator and the user | By provisioning of policies in the Evolved ProSe Remote UE and Evolved ProSe UE-to-Network Relay | Both option 1 and option 2 | null | null | Standards specifications |
End of preview. Expand
in Data Studio
README.md exists but content is empty.
- Downloads last month
- 34