Unnamed: 0
int64 0
1.5k
| category
stringclasses 15
values | text
stringlengths 100
9.09k
| group
int64 0
2
|
|---|---|---|---|
800 | Industrial_and_Scientific | Great for hauling heavy IT equipment
I work in IT, and often need to cart around desktops/servers/printers and the like. This is an invaluable tool for your trunk or office.<br />I have had a few of these, and this one is very sturdy and solid. It says 300+ max weight, and I think it could handle that. I have piled up computers and monitors on it and used it to go up and down stairs with no issues. It is a little on the heavy side because of this (13lb) so keep that in mind.<br />The base is nice and big so that you have more surface area for stacking. It opens and closes very easily and collapses flat for easy storage.<br />*** I hope you find this review real, helpful, and really helpful! *** | 1 |
801 | Industrial_and_Scientific | Exactly as advertised
Works everybit as described. Easy to install, looks great and made the necessary difference to my gas fireplace. Took it from looking like gas logs to a fireplace. | 1 |
802 | Industrial_and_Scientific | Good product.
Works well haven't seen any residual lines so far through 2 rolls, bought 6 more . worth the cash. | 1 |
803 | Industrial_and_Scientific | Made in China. Nice, but crazy overpriced for Chinese paper.
These are nice paper popcorn buckets / containers. Fairly thick and sturdy. My only issue with them is how crazy overpriced they are for Chinese paper. At the current price of 25 bucks. . . That makes them .50 each, and they could not have cost more than a few pennies to make in China. If you don’t need many, then they work. Otherwise there are a lot of lower-priced options.<br /><br />These containers are Made in China and being sold by a Chinese company on Amazon. | 1 |
804 | Industrial_and_Scientific | Great for work
I work in a hospital & these have been great for cutting off bandages, tape, etc. Lightweight, fits in my scrubs pocket, great cutting, great price. | 1 |
805 | Industrial_and_Scientific | Solid little caster
Totally decent caster. Make sure you measure what you want to elevate and move around because these are only 1.25" tall and can only hold 30lb each. Each caster has a full lock. The mechanisms all move free and smooth so far. | 1 |
806 | Industrial_and_Scientific | BEST DESIGN EVER
Love the overall unit design, especially the long spout that reaches out over the kitchen sink edge so water from a wet hand or scrubber tool isn't dripping on the counter top. It gets constant use in my kitchen and keeps on performing consistently without eating up batteries. Hint: When filling the soap chamber I recommend adding about 1 1/2 inch of water first, if you use the heavier kitchen liquid like Dawn or creamy Soft soaps. I have units in my kitchen & bathrooms and am pleased. | 1 |
807 | Industrial_and_Scientific | Liquids stay secure
I have used several of the small jars in a couple sizes for skin care products mainly for travel use. There work great. The lid is easy to twist and secures snugly to the jar. Liquids stay inside. | 1 |
808 | Industrial_and_Scientific | strong plastic, close well
Sturdy and close well. They are not sandwich size - so don't buy for that use. Great to use for storage of odd things | 1 |
809 | Industrial_and_Scientific | Fair quality only
I have bought several orders ....about a dozen probes and several were received broken . One unit was never welded at all . This shows poor quality testing . The plus is that they are relatively inexpensive and they did replace the defective units . | 1 |
810 | Industrial_and_Scientific | Perfect for sleeping
I have been using this roll to cut mouth strips for sleeping. They keep me from mouth breathing at night. | 1 |
811 | Industrial_and_Scientific | Pro Safe Spray Bottles, 3pk.
Very good product, just what I needed for all purpose cleaning and plant care. I might purchase more in the future. I used one of the bottles to mix a squirrel detterant spray. Well made, no complaints so far.:-) | 1 |
812 | Industrial_and_Scientific | just what you need
love these! i have used them for so many different projects from key holders to coffee mug storage. sturdy, shiny, easy to install! dont even need a drill | 1 |
813 | Industrial_and_Scientific | Pack the mule she will carry it, as they say, now however there is a load limit.
I like the different handle positions, I would recommend this product to anyone especially the older folks such as I. | 1 |
814 | Industrial_and_Scientific | Perfect for cast iron pans!
Absolutely a must buy if you have cast iron pans. This thing is amazing. | 1 |
815 | Industrial_and_Scientific | It did it's job well.
I use this product as a painting palette, when I finish my painting sessions I just throw it away. | 1 |
816 | Industrial_and_Scientific | Ample Supply
This is an ample supply of surgical masks. There are two boxes here so I put one in each of my vehicles. Even though I have reusable ones, sometimes these seem like the better choice. They are disposable so I can just deposit them into a trash can when I leave a store or other public place. Since I rarely go out during the pandemic, they will last me a long time as well. | 1 |
817 | Industrial_and_Scientific | Good product
This product was very easy to use. I needed something to keep my decorations in place on my balcony, this seems to work very well. We had three severe thunderstorms and these held up very well. I am very satisfied with this purchase. | 1 |
818 | Industrial_and_Scientific | Great product! Very happy!
Amazing little case for slides. Very well built. Very protective, well made case. Great quality. My children have already Mounted tons of slides and put them in this case. I will be purchasing a few more! Thanks! Great product! | 1 |
819 | Industrial_and_Scientific | Very convenient and easy to use and setup
Easy to use and set up purchased 2 and will purchase another for my moter | 1 |
820 | Industrial_and_Scientific | 5 stars because their great but be sure to check your voltage.
These were too big for what I originally purchased them for but found a different use. As with all of the orange drops, great caps. | 1 |
821 | Industrial_and_Scientific | Great Dispenser
If you are looking to repair small jobs this is the product you are looking for. It has an excellent lid closer and the long tip makes it easy to use in small or tight places. | 1 |
822 | Industrial_and_Scientific | Long and flexible
This Sihuuu silicone bottle brush is flexible and long making it a great tool for cleaning hard reach bottoms on glasses, tumblers, and sports bottles. | 1 |
823 | Industrial_and_Scientific | Very thick
I have bought these numerous times. I redo furniture and when I’m done I put them in these bags for protection. Nothing and I mean nothing can get in with a good zip tie to close it up. Worth every penny! | 1 |
824 | Industrial_and_Scientific | Great buy, - period!
I purchased this b bearing as a replacement to my hayward 1Hp pool pump for more then half price over local pool supply store quote. Watched youtube how to replace it and did it step by step saving $ 200. It has been six months of quite pool pump performance with this great product. | 1 |
825 | Industrial_and_Scientific | Perfect! Communicates all the information we need it to ...
Perfect! Communicates all the information we need it to for our radiography suite. | 1 |
826 | Industrial_and_Scientific | Good buy
These wheels fit the purposed intended. We made boxes for deck gardening and din't want them to rest directly on the deck. These wheels roll and turn very easily and allow us to move our garden around with ease. Our boxes are 4 ft x 15 in and have a backdrop of over 6 ft to allow trailing veggies to grow vertical. Time will tell how they hold up. | 1 |
827 | Industrial_and_Scientific | Just add tubing
The good thing about this is that you don't need to care what types of threads are on each of the pieces because you have everything you need right in one pack (except for the plastic tubing, of course). I mention this because I had heard some reviewers of other items by this company complain that some pieces had British threading, etc.<br /><br />I'm not sure why the plastic flex piece doesn't have a pointed spout rather than the strange shape that it is, or even some adapters to make different shapes if they wanted to get fancy.<br /><br />Comes with teflon tape as well, which is always nice, although I would expect anyone buying something like this would already have a hundred full rolls of the stuff laying around.<br /><br />The magnetic base is really nice and heavy and strong, magnetic-wise. That makes the whole ensemble seem really pretty good. | 1 |
828 | Industrial_and_Scientific | Sets your cart apart.
What I like about this cart insert is that it sets your cart apart from other carts, that doesn't have a blue insert. This blue insert makes your cart look different than the rest, which is best. It also hides what’s in your cart from peering eyes it may not need to see inside your cart maybe. I recommend my friend. Thank you for reading my review. I hope it is helpful for you. If so, you can check the helpful box below, it will help me review some More. God bless you. May the rest of your life be the best of your life. O DEE | 1 |
829 | Industrial_and_Scientific | Create a Dirt Sifter With This
We used the mesh to create a sand sifter to eliminate larger rocks. It worked great. Built a frame, stapled this to the frame, and sifted the dirt. It held large rocks as well as small rocks no problem. I live in the rocky desert of Arizona, so this was exactly what I needed. | 1 |
830 | Industrial_and_Scientific | Not good quality
Product is not great quality, plastic drive gear is mis-formed, causing binding and skipping. Ordered a replacement drive gear to see if this is only issue. | 1 |
831 | Industrial_and_Scientific | Polishing ease
I love the 1 lb jewelers rouge polishing compound! A little dab will do you on the bench polisher or in the vibratory tumbler - my tarnished silverplate flatware sections come out sparkling. I highly recommend this size if you have a lot of polishing to do. | 1 |
832 | Industrial_and_Scientific | Good 5" interface pad.
These interface pads in general are great for finish sanding, especially of curved surfaces.<br />Easier on both the hands and the sandpaper.<br /><br />These particular pads seem to be pretty good quality, with good hook & loop fasteners on both the hook and loop sides.<br />The foam is comparable to similar pads from other manufacturers, not quite as dense as 3M pads.<br />And if they're like the rest, they won't last as long as 3M pads, none of the knock-offs do.<br />But that doesn't mean they aren't a good value, particularly if you're going to abuse them anyway, as we do.<br /><br />The most common failure is separation of the foam and the hook/loop layer.<br />Don't just yank the paper off the pad, or the pad off the sander, get your fingers in the gap and peel them apart to minimize strain on the foam.<br />Also use them primarily for fine grits and let the sander do the work. Bear down on one of these with coarse paper and it will heat up and crumble in short order. | 1 |
833 | Industrial_and_Scientific | Five Stars
This filament is beautiful and works great.<br />It doesn't really glow in the dark, though. | 1 |
834 | Industrial_and_Scientific | So far, so good. will update later
This little machine has some suction. I am amazed. I am impressed. I am still learning how to use it, but so far i love it 😍 | 1 |
835 | Industrial_and_Scientific | They fit exactly as the popular brand
Just wired noids not in car yet I'll post on performance but should work fine and look great. Lay n play on my bomb | 1 |
836 | Industrial_and_Scientific | Picture and Product - True as Stated
I received the stethoscope case and have used it for a while now, it is holding up well, sturdy, stays clean, and also like the handle. The zipper works well and have had no issues opening or closing the case. Good product! | 1 |
837 | Industrial_and_Scientific | Boardwalk Huracane Low Suds Laundry detergent Awesome
Awesome product. Shipped quickly and was as described and more. Use to laundry for motel. The maid said she wanted some of this because it was fantastic. | 1 |
838 | Industrial_and_Scientific | Not just for keeping out drafts
Works nicely for sealing up small areas. This worked like a charm to seal some areas where the window screens don't fit real tight. Obviously I didn't buy it to keep the drafts out, but instead it works to keep those Lady-bug looking Asian Beetles from moving in as the weather is getting cooler. Last winter there were too many that found their way into one of the bedrooms, and then plagued us all winter. Now we can open our windows on nice fall days without the Asian Beetles moving in at the same time. The foam tape is easy to work with and sticks well. | 1 |
839 | Industrial_and_Scientific | Many (but not all) of the performance benefits of 100% silicone with none of the problems
I've been using Dap caulk for many years and have never been disappointed. This Kwik-Seal caulk it great for bathroom tub, sinks, and other similar uses where there's a lot of water. While it is not as good (in terms of water resistance) as 100% silicone, this is much easier to work with. Unlike 100% silicon caulk, this spreads easily, is far less smelly and can be cleaned up with water. A snap to work with compared with silicon.<br /><br />It takes about 24 hours to fully set (or as much as 48 hours if the air is humid). Once set it will last for years before needing replacement. Of course, a good bond requires completely cleaning out the joint before caulking. No caulk can stick well to a surface that is not properly prepared. | 1 |
840 | Industrial_and_Scientific | Contains DINP
I didn't end up using this so please disregard if you are looking to see how effective this item is.<br /><br />I planned on using it for stairs that are commonly used by my pets as well. After receiving the item the package stated the item contains DINP which has harmful side-effects in small animals. I didn't feel comfortable using it my home since my small dog already has some health issues and the last thing I need is to bring a knowingly toxic substance into my home.<br /><br />Do your own research if your concerned and decide for yourself. I just wanted to give others a heads up since I personally wouldn't have wasted my time purchasing it had I been aware. | 1 |
841 | Industrial_and_Scientific | Little too pokey
Tips of hooks will poke nearly through even a high quality towel. I wouldn’t dare hang clothing itself. | 1 |
842 | Industrial_and_Scientific | Nope
I covered the back of a small power strip with this & pressed it to the back of a chest. It fell off about 5 minutes later. | 1 |
843 | Industrial_and_Scientific | Exactly What I Needed! Perfect Paint Bottle Agitators!
The Adamas-Beta Solid Round Clear Glass Boiling Stones Beads were exactly what I needed to add to my small bottles of paint. Sometimes I like to custom mix my own pigments into a medium, or even add mica powder. The problem I found was that the solids would clump together in the bottom of the bottle and become difficult to shake. This was not good for me as pigments are an investment in quality work. This is no longer an issue as I have used these glass beads in the bottles. Most folks use the metal pellets for this, but metals are not compatible with all of the solvents I use. Glass is perfect as I have no worries that it will contaminate or cause an undesirable chemical compatibility issue for me. I am recommending this to other artists and hobbyist I know. This set is a much better value than similar glass beads I have purchased before from a hobby shop. I like that there are options for the sizes, and I certainly will re-order these in the near future. I hope you have found my experience useful and kindly will click the button below. | 1 |
844 | Industrial_and_Scientific | This tape works as advertised!
I've bought this tape to repair a 34-year-old plastic cover on a full mattress for a baby's cradle. It worked perfectly. The mattress is now perfectly restored and resting in our cradle that from time to time houses are new grandbaby. | 1 |
845 | Industrial_and_Scientific | High quality masks that feel reusable
I keep a bag of these in my computer bag wherever I go since I use them so often. They're super high quality and the comfort is adjustable. The top of the mask along the nose bridge has a wire inside so you can shape the mask according to your face and fit it fairly tightly. I feel very safe with this mask because it covers your entire face with minimal openings on the side (because it's adjustable to your face). Highly recommended and I'll be coming back when I run out of these masks. | 1 |
846 | Industrial_and_Scientific | I don't recommend
With this test you have to download an app to your phone. It was more convoluted than I expected. I didn't bother using it, and unfortunately you can't return it. | 1 |
847 | Industrial_and_Scientific | We'll Just Call Them: "Lenten Masks!"
Why not match the liturgical color of this Christian season? Violet or purple is the color. The people appreciate it. Leave them in the back of Church, or at the entrances, you'll see that they'll choose them! Even if they come to Church with another kind! FYI: they are not solid purple as shown, but have white edges as in the pictures. | 1 |
848 | Industrial_and_Scientific | Norton products are just better quality
These cutoff wheels are excellent quality and I have used them in the past without issue. I know they are made in China, but they are significantly better than no name brands you find on here. They hold up well and work great on sheet metal and when cutting pieces for my car. They are very standard, and I would recommend them highly. | 1 |
849 | Industrial_and_Scientific | Cheap and ineffective, don't bother
These are garbage and cheaply made. I saw other reviews to this effect but wanted to save some money and took a chance. Not worth it at all.<br /><br />Maybe 1 in 3 works when used to jump wires. This weak point was the source of much frustration during my project. I can't even justify paying to package them for a return since I'm not near a drop off at kohl's or ups store so I'm just throwing them away. | 1 |
850 | Industrial_and_Scientific | Work Well for Filing
These work great for our filing cabinets! They were very affordable and what we needed. I have no complaints and would recommend these to keep your papers in order! | 1 |
851 | Industrial_and_Scientific | Soft and absorbing
Convenient pop-up packaging<br />I was new at using a product like this and I’m not disappointed<br />I would buy again | 1 |
852 | Industrial_and_Scientific | Does Both Things I needed to Do
This is perfect for plugging mouseholes.<br /><br />It's also excellent for scrubbing rust off household radiators. Recommend. | 1 |
853 | Industrial_and_Scientific | I love this product
I first saw this Broom/Pan combo at work, and began testing it out. Over a couple weeks I couldn't stop wanting to sweep things up as I waited for the elevator to arrive. It made my flimsy home set feel pretty limp/imperfect. Though it is double the price of your typical set, I am now a proud owner and refuse to buy anything else. | 1 |
854 | Industrial_and_Scientific | Good Hydrometer, Cheap tube
Hydrometer worked as advertized, water came in at zero and some vodka right at 80 proof. The tube however is extremely thin and cheap. It broke on the first day of use near the base when rinsing out with lukewarm water without being bumped against anything. The hydrometer had never been dropped against the bottom causing a crack either. | 1 |
855 | Industrial_and_Scientific | It meets the OSHA and legal compliance requirements and is heavy duty.
I am honestly not sure how to review a SDS / MSDS binder and holder. It meets the OSHA requirements, it meets our local fire dept requirements and it meets the insurance requirements. What more can you ask for. | 1 |
856 | Industrial_and_Scientific | 3D printers worst nightmare
My first spool of this filament came in with air in the bag that holds the spool so I returned it. Amazon was great and sent a replacement right away. The next spool came in perfect...or so I thought. Didn't matter what I did, what temperature I set or what god I prayed to I couldn't get this ABS filament to do anything besides constantly clog up my nozzles and clump up and make some pretty interesting string art. I spent more time taking my nozzle apart to fix whatever issue this filament caused than actual printing.<br /><br />I've also tried their PLA filament and that seems to do the same thing as this ABS. Do yourself a favor and stay away from this headache. | 1 |
857 | Industrial_and_Scientific | Bought for a friend
Friend said the filament is good. Perfect size and good delivery arriving on time. | 1 |
858 | Industrial_and_Scientific | Works wonders on hardwood floors
I used this on my hardwood floors. What a surprise that was. I feel that it gave a new life to the floors that were dull and worn. I gave two coats to the hardwood floors. Looks like they were refinished.<br /><br />Now, for a more porous tile in the kitchen, it did not work as great! But, I have it for the tile in the lower bathroom and laundry. Just pour a dab and spread it. Great floor finish! Especially great for dull worn hardwood floors. | 1 |
859 | Industrial_and_Scientific | Easy to use and accurate
I bought these at the beginning of the Omicron surge prior to the federal government giving them out to have on hand just in case. I didn't end up needing them until recently but I sure am glad that I had them. I ended up getting COVID and because I work in healthcare, I'm not allowed to go back to work until I have a negative antigen test so I have gone through quite a few tests. These tests are so easy to use and the result is so clear. It was reassuring when tests were sent out by the federal government that I received these same ones reassuring me of the trustworthiness of these. Overall I'd recommend these! | 1 |
860 | Industrial_and_Scientific | Heavy and it is what it is!
Its heavy as a brick which is good, it won’t slide on you whilst trying to get a piece of tape, comes in handy when wrapping meat and you want to get the job done quickly with out having to tear the tape off the roll by hand, or fight to find the end of the tape. | 1 |
861 | Industrial_and_Scientific | An excellent adhesive for most materials
An excellent adhesive for most materials, including fingernails! I am using it, among other things, to repair my broken nails and it works better than the stuff they use at the nail salon. | 1 |
862 | Industrial_and_Scientific | Notice how it stated "Deskside"?
I'm a very visual person so looking at the picture, I judged this paper basket would have fit under my desk, just like the blue ones they have at work. But upon arrival, I see I should have paid more attention to the description or even the size because it clearly is better suited for the side of the desk and not under it. That said, this is a very well made wastebasket. It is heavyduty, has a nice lip for tying your trashbags around, and holds a great more than a desk wastebasket. I use it for paper recycling and it is perfect. | 1 |
863 | Industrial_and_Scientific | Not accurate
I am not sure if my product was defective, but it definitely was locking accuracy. I liked that it was easy to read the LCD screen, but the reading was changing at all times, so it decided the purpose of using it. Unfortunately, I couldn't use it so I had to return. | 1 |
864 | Industrial_and_Scientific | They are just okay
Instructions are severely lacking. Screws are pretty much worthless in that they strip so easily. You must assemble after you attach the first bracket. Long bolt goes on the black part and short bolt goes through the orange part. Table/bench really needs to be sitting flat or they don't all 4 contact the floor and it's wobbly. I had to start over three times. Still wobbly. | 1 |
865 | Industrial_and_Scientific | Good bargain filament
I'm always very careful with cheap PLA, but this stuff works very well. For all PLA, I run the bed at 80C and the hot end at 205-210C and this spool extruded like silk in this temp range. No feeding problems and it was spooled well and came off straight without a hint of trying to birds nest. If the price stays low, this is a great bargain! | 1 |
866 | Industrial_and_Scientific | Perfect to wear with my glasses
Does what its intended for. Works great with my glasses. I get no fog when using them. | 1 |
867 | Industrial_and_Scientific | A solution for my craft supplies
LOVE the bags. I do a lot of crafts and have trouble sorting the supplies into bags for storage. Regular bags tear and fall apart quickly. These are working exactly as I'd hoped. They are tough, strong, and hold much. I've also put all my electronic gear into one and am pleased with how well they work. No tears, rips, or failure to close. I can recommend these for almost anything. | 1 |
868 | Industrial_and_Scientific | Seems to do the job - HVAC
This is an excellent blade for the price. I understand there are many brands on the market but I have found this to be very good for the price! I use it everyday and haven't regretted buy it once! | 1 |
869 | Industrial_and_Scientific | Hard To Find
Very strong round magnets ideal for use in remote controlled aircraft hobby to hold in place pilot canopy. | 1 |
870 | Industrial_and_Scientific | BUY!:)
7/12/21• No Liking about this product........ IT’S More like LOVE this Product! This is my 2nd one. Why? Because I Keep it in my travel bag when travel! I use it to suck off the lint too! And all the fuzzies! This lil gal chews em off and she gets praises:)))) This is an awesome product. I use it on everything! Socks are tricky because socks seem to ball up and getting the FUZZ BALLS off? Very tricky. Cuz? Try pulling them off by hand? Then this lil gadget does same and sometimes it wants to not do well:) but I’ve learned how to make it work better🥰<br />B U Y ! You will not regret!:) KsK🥰 | 1 |
871 | Industrial_and_Scientific | Great help when wearing shoes!
I suffer from Plantar Fasciitis on my right foot and ordered this to help relieve some of the pain. It's well made and easy to use. It provides more arch support than the arch bandages that I usually use. It works well when I'm wearing shoes, but when I'm barefoot, it feels too hard under my arch. The gel piece is not hard at all - it's nice & soft, but it doesn't feel good at all when I'm barefoot. This is just a personal preference and I am trying to get used to it. But I do love how much easier I can walk around wearing it with my shoes on! It's fairly inexpensive and definitely worth the try. | 1 |
872 | Industrial_and_Scientific | Best One Yet!! Great picture quality!!
I absolutely love this gadget! It has so many different ways to use it. Recently I had to snake some Ethernet cable from my living room to the basement!! This came in to save the day. It has awesome picture quality and super easy to use! Highly recommend!! A++ | 1 |
873 | Industrial_and_Scientific | So far so good
Not only did I get the 5 pucks but a hammer and emergency blankets. This is my third purchase | 1 |
874 | Industrial_and_Scientific | Bolt Protectors
This particular bolt protector fits a 1/4" bolt perfectly and is in the color that suits our product. The length covers most of the exposed bolt. There are a variety of sizes and colors available. | 1 |
875 | Industrial_and_Scientific | Horrible!
These are the worst pegboard hooks I have ever seen! I have been using large amounts of pegboard for years and I was shocked when I tried these. They are designed wrong. The hook part is welded too far from the pegboard adapter so the hooks do not sit flat and instead point up at 45 degrees or more. They are just total crap. Plus, they are of crappy material. Take my advise and do not buy this junk. Amazon should not even sell them. Junk, Junk, Junk! | 1 |
876 | Industrial_and_Scientific | Lid torn off by wind - hasn't held up at all - NOT WORTH THE PRICE.
I would not buy again. It has not weathered well. The lid was torn off by the wind, container plastic pieces chipping away. I wouldn't advise this manufacturer. I thought paying significantly more would provide a long-lasting product. | 1 |
877 | Industrial_and_Scientific | Best purchase for price on shopping cart
Best purchase for price on this handy & sturdy shopping rolling cart. Item arrived 5 days b4 actual promised date. This cart is sturdy (hard plastic) and the wheels roll easily on concrete as well as on carpets. This cart is by no means a dolly for transporting heavy items like cans of paint, large metal objects, etc. If you plan to use it for heavy items the hard plastic will break(it is NOT a metal cart like ones found @ supermarkets). It is a shopping basket that rolls and has a telescoping handle which is what I liked about this. I'm a tall person 5"11" and I can easily reach the handle, tilt the cart and roll it away. I used it this morning when I went grocery shopping and easily carried 3 bags worth of groceries in it from the parking lot into my apt. building. | 1 |
878 | Industrial_and_Scientific | Amazing Stuff Relieves Joint Pain
Amazing stuff. When I put it on the base of my thumbs, it feels warm, then pain melts away. | 1 |
879 | Industrial_and_Scientific | Above expectations!
The initial one I received did hold a charge for more than a day. So I contact the seller and I received a replacement within a few day. So far its holding the charge. It's a very easy to use inspection camera. The picture quality is good. It comes with a SD card. If you need a not to expensive inspection camera for DIY projects this is it. | 1 |
880 | Industrial_and_Scientific | I'll buy again
New to 3D printing, but I've tried several company's PLA. This filament is nice. Easy to dial in with the standard settings in the slicer using your typical settings. The prints come out looking good. I'll definitely look at this brand again in the future. | 1 |
881 | Industrial_and_Scientific | Well made bolts--great for projects
These are well made bolts. They're made out of good steel; they are clean (free of oils, machine marks, or imperfections); they are made with precision. Due to this, they work well: they screw in easily and hold on tight. The variety is great for projects, as you won't have to settle for the wrong length--you have options! | 1 |
882 | Industrial_and_Scientific | 2 magnets
Very brittle broje off in shards. Got stuck together even with tape on them cant get them apart. Don't know where to find better quality. Inside is plastic or something ceramic, like clay. Dissapoointing. | 1 |
883 | Industrial_and_Scientific | Made in China. Handle is a little shorter than some others.
I’ve used several of these folding hand trucks previously. This one is a little lighter in weight and the handle is a little shorter than some of the others that I have used. Also, this one shows to have a maximum weight limit of 132 pounds. Others will hold up to 150 pounds, but it’s not that big of a difference. This one opens and closes smoothly. They wheels role very well.<br /><br />Made in China. | 1 |
884 | Industrial_and_Scientific | Electrolux Sanitaire Commercial Vacuum
Does a great job of picking up dust. However, does require a lot of effort to vacuum rugs. Works great on hard surface floors but not easy to use on carpets. Was never able to attach the accessories holder as shown in the instructions. No instructions for the vaccum head about when to raise or lower the lever? The crevice tool was easy to install and store. | 1 |
885 | Industrial_and_Scientific | Perfect fit
We had purchased a nice 4 tier metal shelving unit but it did not have casters. Too heavy to move without them so we tried these. They are a perfect fit and the shelves are easy to roll anywhere. | 1 |
886 | Industrial_and_Scientific | Great Screws
These screws worked well. They are the size indicated, the material was high quality, and I didn't have any trouble using them. I recommend them! | 1 |
887 | Industrial_and_Scientific | New to 3D Printing and Very Happy with the product
I've wanted a 3D printer since they had their first surge on the consumer side years ago, but never had the disposable income to pick one up. I finally decided to pull the trigger on it and am very happy with what I got.<br /><br />(Picture descriptions in Part 3- Use)<br /><br />## Why Ender 3:<br />Before purchasing I watched a bunch of videos from various people and even though they consistently said "I like X printer over the Ender 3" most of them would also qualify their opinion with "I've owned 2-3 Ender 3's". Frankly, if you've bought a product that cost a Couple Hundred Bucks *MULTIPLE* times, then I can only take that as an endorsement.<br /><br />I also looked at many samples from Ender 3 that made me confident that the quality would be acceptable.<br /><br />Furthermore, it's pretty clear that Ender 3 is easily mod-able and is well supported within the community, so it seemed like the easiest machine to troublehshoot/fix/improve if I needed to (and I assumed I would need to)<br /><br />## Assembly:<br />I have some degree of mechanical intuition (nothing I would boast about, but I can get around alright), so even though the instructions only had pictures, I was able to get through about 80% of the assembly easily.<br /><br />The X gantry (the crossbeam assembly with the hotend, in case I'm using the wrong part name since, again, no text in the assembly instructions) was a bit ambiguous based on the pictures so I had to pull up a video tutorial to assemble that.<br /><br />The wiring instructions were also a jumbled mess that I had to stare at for about 10 minutes before finally realizing what went wear (even then I initially plugged the "x" stepper cable into the "z" stepper and only realized my mistake when I couldn't find a place to plug the x limit switch's cable).<br /><br />## Use (with pictures)<br />I spent about 15 leveling the bed using the ubiquitous "Paper Method" that I had seen on several Youtube videos (put a paper between the nozzle and the bed and then adjust until the paper has decent pressure but can still be moved).<br /><br />Picture 1 is the Bed Leveling test print I used at that point, which told me I needed to spend another 20 minutes leveling the bed again.<br /><br />After that I started to print the Test Dog Creality provides. While it was printing, I found out via Google that a) it was going to take longer than I wanted to wait, and b) the filament Creality provides isn't even enough to print the Dog (which seems really shortsighted to me, since most beginner users like myself would assume that you would be able to print at least one of the test pieces with the provided filament).<br /><br />During those two initial prints I had heard this "Pacman" type noise (similar in tone to when you pick up the power dot). Since it sounded like your typical piezo/computer board speakers, I found a cover for the one on the Ender 3's PCB and printed it out.<br /><br />As you can see (top of Picture 2) it came out pretty badly warped. It was late so I continued printing to use up the rest of the filament, but the following morning I did some research and found it was probably because my X Belt was a hair loose; felt tight to me, but I gave it a good tug to make it as tight as I was willing (I didn't want to break anything after all) and I haven't had any problems since<br /><br />I had also already downloaded a whole list of interesting things to print so I picked out the Wire clips to use up the rest of the filament (Picture 2- bottom). I didn't notice the warping as much on those ones, but the walls clearly had gaps in them. I wasn't able to find an explanation for that one on the internet, but haven't had that problem since I tightened the X Belt, so I assume that's all it was.<br /><br />The following day after work I pulled out the last of the starter filament and put on the roll I had bought with the Printer and printed my first Benchy (Pictures 3 and 4). While there are some clear defects in it I'm actually extremely happy that it turned out as well as it did (I'm a bit of a pessimist).<br /><br />Based on the Benchy, I re-leveled the bed again and have since been printing upgrades to my Ender 3 which have all been turning out extremely nice: I had 1 burr on a 1 screw hole and some very, very light stringing on one of the 10 pieces I've printed so far.<br /><br />## Final Note of Significance<br />Don't under estimate how long it takes to make a 3D print. Going into this I was of the opinion of "Well, **I'm** not doing any of the work, so it doesn't matter how long it takes", but there are two hang ups that I didn't really factor in.<br /><br />First, when you're excited to have something Printed you're inevitably more impatient to have it done. I'm a pretty patient person, but even for me I end up sitting at my desk glancing every 15 minutes to see how much longer it's going to be before I move onto the next piece.<br /><br />Second, smaller pieces may take significantly longer, depending on their shape and quantity. As an example, I'm currently printing the recommended Cable Chains for the Ender 3. After this review is done I'll take the mounting clips off the bed and then print the *Bottoms* of the Chain Links. Just looking at the Chain Links, they seem like they should be pretty small and that they should get done relatively fast.<br /><br />THEY WILL TAKE 11 STRAIGHT HOURS!<br /><br />There are 3 primary reasons for this: I need 25 of them; they have long, vertical extrusions; and they are thin. Because those extrusions are vertical, they get sliced into many layers instead of just a couple (if they were horizontally oriented). Because they are thin, the printer can't take a shortcut by just using an infill mesh on the inside. Finally, because it takes extra long because of those other two points, the quantity because a serious factor as well.<br /><br />And that's just the *Bottom* of the clips: I'll have to print the Top of them after that...<br /><br />## Bottom Line<br />Despite that last point, I still love this printer and look forward to continuing to use it for a long time in the future. | 1 |
888 | Industrial_and_Scientific | Look and Feel Good
We have used this anti slip tape for both our stairs and bathtub. It feels good and it is barely noticeable. The main reason we like this is because it is made of PEVA rather than the alternatives such as sand paper, which tends to leave a trail of dust and PVC, which can be very toxic. This tape is also very easy to use. Just clean, peel, and stick. | 1 |
889 | Industrial_and_Scientific | Quality product.
I used this to make a flap for a dog door. I am keeping the extra on hand for replacements. Excellent value. This cost less than 1 made to order flap. | 1 |
890 | Industrial_and_Scientific | Like it - not sure about some of the other comments
I have been using this on my new tile floor (it shows almost everything) on a nightly basis. It picks up almost everything except things that over about 1 1/2 inches (such as paper). I used it on an oriental rug, and for a quick pick up it was fine. I also used it on the hardwoods around the rug, and I cannot complain. Sometimes you do have to over things twice, just like I have to do it with a broom, but with a broom I have to get to the floor to get it into the dust pan. | 1 |
891 | Industrial_and_Scientific | Capacitor was perfect fit and delivered quickly. TV working perfectly.
Samsung TV working again with replacement of bad capacitor. Very happy with purchase. Ready for next 5 times this happens. | 1 |
892 | Industrial_and_Scientific | Great sanding sponges
I use these to sand/finish resin projects. The shape and flexibility work really well. Being able to rinse out the resin dust and reuse is great. | 1 |
893 | Industrial_and_Scientific | Loos Stainless Steel 302/304 Wire Rope, 7x7 Strand Core, 0.125" Bare OD cable
I ordered this cable or Rope if you will, to use in an application that this size will not work in. I went off the assumption the 0.125" was the OD of the rope and it is about 1/4" OD and will not work for the use I had planned for so it will be made into a cable lift of a Kayak in the Yard on a tree. Well, that's how it goes. Seems to be a good cable though! | 1 |
894 | Industrial_and_Scientific | Geek tea
My son loved this and we will get more. We have enough science geek in us to enjoy this sort of thing.<br />I hope to gain a set with all different sizes.<br />I works well and we love to use real glass for drinking.<br />strong stable base. | 1 |
895 | Industrial_and_Scientific | A good fit
A good mask but a few ear loops detached while putting them on. Make sure you carry more than one | 1 |
896 | Industrial_and_Scientific | Pretty bags for my Alterations Shop
Bought these for my alterations shop for when garments are returned to my clients. Many times clients just hand me a bunch of pants or tops that aren't in a bag or on hangers. I feel it represents my shop and my work much better when I can hand them their items in one of these pretty bags. They are just plastic, but what woman doesn't like receiving a cute pink tote! | 1 |
897 | Industrial_and_Scientific | Does exactly what it should do - hangs on tight and holds things.
There is not a lot to be said for a metal magnetic hook.<br />Does it do the job?<br />You bet!<br />Strong magnet, and they look great. | 1 |
898 | Industrial_and_Scientific | Keep looking
Inconsistent gold coloring; splotchy and matte. The screws provided are not flush with either side of the bracket. | 1 |
899 | Industrial_and_Scientific | Worth the price-
Great product- used for cleaning inside & outside surfaces- Concentrated don't take much per use-Smells good, not over whelming- but fresh- | 1 |
Subsets and Splits