NexesMess/Llama_3.x_70b_Flipper_0.24

about

A fifth merge between a L3 70b model (Dolphin 2.9.1) and a L3.1 70b base model (Tess 3) inspired by https://huggingface.co/sophosympatheia/New-Dawn-Llama-3.1-70B-v1.1 and https://huggingface.co/jukofyork/Dusk-Miqu-70B .

This time, I double epsilon from 0.05 to 0.1, and density remains at 0.25.

---

benchs

• PPL 512 Wikitext Eng : 4.22 (mediocre)
• ARC-C : 61.85 (very good)
• ARC-E : 77.70 (average+)

---

tests

Let's see if it can hold long context (on testing):

• At 10k, it holds coherence.
• At 20k, it holds coherence.
• At 28k, it holds coherence.
• Step validated. I will try the 0.25 density / 0.1 epsilon combo with 0.24, just to be sure I'm not missing something.

---

credits

Credits go to Jukofyork and Sophosympatheia, as well as to the Arcee/Mergekit folks and models authors of course.

---

merge

This is a merge of pre-trained language models created using mergekit.

Merge Details

Merge Method

This model was merged using the Linear DELLA merge method using migtissera/Tess-3-Llama-3.1-70B as a base.

Models Merged

The following models were included in the merge:

• cognitivecomputations/dolphin-2.9.1-llama-3-70b

Configuration

The following YAML configuration was used to produce this model:

merge_method: della_linear
base_model: migtissera/Tess-3-Llama-3.1-70B
models:
  - model: cognitivecomputations/dolphin-2.9.1-llama-3-70b
    parameters:
      weight:
        - filter: q_proj
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - filter: k_proj
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - filter: v_proj
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - filter: o_proj
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - filter: input_layernorm
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - filter: up_proj
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - filter: gate_proj
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - filter: down_proj
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - filter: post_attention_layernorm
          value: [0, 0, 1, 1, 1, 1, 1, 1, 1, 0, 0]
        - value: 0
      density: 0.25
      epsilon: 0.1
      lambda: 1.0
  - model: migtissera/Tess-3-Llama-3.1-70B
    parameters:
        weight: 1.0
        density:
          - filter: q_proj
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - filter: k_proj
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - filter: v_proj
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - filter: o_proj
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - filter: input_layernorm
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - filter: up_proj
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - filter: gate_proj
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - filter: down_proj
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - filter: post_attention_layernorm
            value: [1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1]
          - value: 0.5
        epsilon:
          - filter: q_proj
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - filter: k_proj
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - filter: v_proj
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - filter: o_proj
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - filter: input_layernorm
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - filter: up_proj
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - filter: gate_proj
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - filter: down_proj
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - filter: post_attention_layernorm
            value: [0, 0, 0.05, 0.05, 0.07, 0.1, 0.07, 0.05, 0.05, 0, 0]
          - value: 0.1
        lambda: 1.0
dtype: bfloat16
out_dtype: bfloat16
parameters:
  int8_mask: true
  normalize: true
  rescale: true
  filter_wise: false
chat_template: auto
tokenizer:
  source: union