The IPUConfig class enables PopArt and PopTorch configuration, allowing to control the behavior of the IPUs. It is JSON-serializable, and can be loaded and saved from / to a local directory / file, as well as from / to the 🤗 Hub.
( replication_factor: int = 1 inference_replication_factor: int = 1 gradient_accumulation_steps: int = 1 layers_per_ipu: typing.List[int] = [-1] inference_layers_per_ipu: typing.Optional[typing.List[int]] = None ipus_per_replica: typing.Optional[int] = None inference_ipus_per_replica: typing.Optional[int] = None optimizer_state_offchip: bool = False replicated_tensor_sharding: bool = False matmul_proportion: typing.Union[float, typing.List[float]] = 0.2 inference_matmul_proportion: typing.Union[float, typing.List[float], NoneType] = None enable_half_partials: bool = True embedding_serialization_factor: int = 1 recompute_checkpoint_every_layer: bool = False device_iterations: int = 1 inference_device_iterations: int = 1 output_mode: str = 'final' seed: typing.Optional[int] = None auto_loss_scaling: bool = False executable_cache_dir: str = '' **kwargs )
Parameters
int
, optional) —
Sets the seed for the random number generator on the IPU.
bool
, optional, defaults to False
) —
Whether automatic loss scaling is enabled on the IPU.
When using float16/half values for activations, gradients, and weights, the loss value needs to be scaled by
a constant factor to avoid underflow/overflow. This adjustment is known as loss scaling. This setting
automatically sets a global loss scaling factor during training.
Note: This is an experimental feature and may not behave as expected.
str
, optional, defaults to ""
) —
Enables caching the compile executables to a directory.
Parameters for controlling the batch size
int
, optional, defaults to 1) —
The number of replicas for data-parallelism during training. It depends on the size of the pipeline as well
as the number of IPUs available. For example: on a Pod16, with a 4-IPU pipeline, replication_factor must
be betwen 1 and 4.
int
, optional, defaults to 1) —
Same as replication_factor
for inference.
int
, optional, defaults to 1) —
Number of micro-batches to accumulate for the gradient calculation.
Accumulates the gradient gradient_accumulation times before updating the model using the gradient.
Parameters related to parallelism
List[int]
) —
Specifies the number of layers that will be put on each IPU for pipelined execution during training.
For instance: [2, 3, 4, 2]
specifies a 4-IPU pipeline, where the first two layers will be put on IPU0,
the following three on IPU1, the next four on IPU2 and the last two on IPU3.
If the default of [-1] is used, the layers will be split evenly over ipus_per_replica
IPUs.
The wildcard value ‘-1’ can also be used in combination with integers.
For instance: [1, 2, -1, -1]
specifies a 4-IPU pipeline, where the first layer is put on IPU0,
the next two layers on IPU1, and the remaining layers split evenly between IPU2 and IPU3.
List[int]
) —
Same as layers_per_ipu
for inference only.
int
, optional, defaults to len(layers_per_ipu)
) —
Specifies the number of IPUs to use during training. This must be consistent with
the number of IPUs used in layers_per_ipu
.
int
, optional, defaults to len(inference_layers_per_ipu) if ipus_per_replica==len(layers_per_ipu) else ipus_per_replica) -- Same as
ipus_per_replica` but for inference only.
Parameters for memory management
bool
, optional, defaults to True
) —
Whether to use the off chip memory to store the optimizer state or to use the on chip memory.
bool
, optional, defaults to False
) —
Shards the optimizer between replicas with zero-redundancy.
List[float]
or float
, optional, defaults to 0.2) —
Sets the amount of temporary memory made available during training on per-IPU basis.
Use this setting to control the amount of temporary memory available to operations such as:List[float]
or float
) —
Same as matmul_proportion
for inference only.
bool
, optional, defaults to True
) —
Whether the data type of partial results for matrix multiplication and convolution operators should be
float16 or not.
int
, optional, defaults to 1) —
The factor to use to serialze embeddings. Nothing happens if embedding_serialization_factor = 1
, and for
embedding_serialization_factor > 1
, the torch.nn.Embedding
layer is replaced by a
optimum.graphcore.modeling_utils.SerializedEmbedding
layer.
bool
, optional, defaults to False
) —
Whether to use gradient checkpointing at the end of every layer. It can help in reducing the memory impact.
Parameters related to host / device synchronization
int
, optional, defaults to 1) —
Number of iterations the device should run over the data before returning to the user during training. This
is equivalent to running the IPU in a loop over that the specified number of iterations, with a new batch of
data each time. However, increasing deviceIterations is more efficient because the loop runs on the IPU
directly.
int
, optional, defaults to 1) —
Same as device_iterations
for inference.
str
, optional, defaults to "final"
) —
Specifies which data to return from a model.
Allowed values:all
: returns a result for each batch.sum
: returns the sum of all batches.final
: returns the last batch.default
: all
for inference, final
for training.Class for PopArt and PopTorch configuration. Handles the conversion to poptorch options as well as configuration pod type specialization.
(
for_inference: bool = False
)
→
int
Computes the factor to apply to the micro batch size to get the combined batch size.
( name: str value: typing.Union[float, int, typing.Sequence] floor_value: typing.Union[float, int] )
Validates the values of Sequence and scalar types to be greater than floor_value
For Sequence[Union[int, float]], ensure that all elements are >= floor_value
For Union[float, int], ensure the scalar is >= floor_value
(
for_inference: bool = False
compile_only: bool = False
)
→
poptorch.Options
Parameters
bool
, defaults to False
) —
If True, the resulting poptorch.Options will be adapted inference, it will be adapted for training
otherwise.
bool
, defaults to False
) —
If True, compilation will be performed offline, no IPUs required.
Returns
poptorch.Options
The option representing the IPUConfig
.
Creates a poptorch.Options
from the IPUConfig
.
( update_str: str )
Updates attributes of this class with attributes from update_str
.
The expected format is ints, floats and strings as is, and for booleans use true
or false
, and for lists
use [a b c d]
. For example: "n_embd=10,resid_pdrop=0.2,scale_attn_weights=false,summary_type=cls_index, matmul_proportion=[0.08 0.2 0.25 0.25]"
.
The keys to change have to already exist in the config object.
( )
Raises
IncompatibleIPUConfigError
or are
IncompatibleIPUConfigError
— Raised if any IPUConfig
attributesare
— not coherent.Tests coherence of IPUConfig
attributes for all modes
in self.modes. For example if matmul_proportion=[0.2, 0.2]
,
ipus_per_replica
must have value 2.